Supercharged S2000

[AstroRide44]

thanks dick, i know its a b18c and i know the F20 is a lot more powerful.

i would use the metal motor but u say its back ordered and im to cheap to buy one, same thing with using one from a diecast one. but i do already have a ITR that my brother screwed up so ill just use that motor and the engine bay cuz they look similar. ill turn it sideways so the tranny is facing back. im hoping that the opening in the hood will be smaller than the engin bay tho. if anyone knows other wise please tell me. thanks

[hydramatic99]

Originally Posted by Shorty4859

Dood, seriously learn ur motors man, ITR motors aint B16's do u know whut a B16 is? Its is Civic SI Motor! A iTR motor is a B18c1..... And that would be hella funney putting a iTR motor into a S2000!!! hahhahahahaha I hope u know a S2000 motor is alot stronger than a iTR.... Thats whut i gotta say...

ITR engines are B18C5's. GSR engines are B18C1's

[pettercardoso]

Originally Posted by hydramatic99

ITR engines are B18C5's. GSR engines are B18C1's

Yep, that's it!

[Steve67]

The JDM ITR engine is b18c the USDM is b18c5 and the GSR is b18c1

[AstroRide44]

hey, i just found this tubro kit from ultimate-racing.com that has great pics of there custom kit. do u guys think i sould try to do this one or the comptech supercharger?


go here to look at it

http://www.ultimate-racing.com/Produ...ewIntake01.jpg

[pettercardoso]

Originally Posted by AstroRide44

hey, i just found this tubro kit from ultimate-racing.com that has great pics of there custom kit. do u guys think i sould try to do this one or the comptech supercharger?


go here to look at it

http://www.ultimate-racing.com/Produ...ewIntake01.jpg

That link isn't working.....

[rmg313]

just an idea

use the block of the b16 its bigger (you need that)

revell messed up if you but the itr block (built) next to the b16(built) the b16 is and looks bigger

anyway you can use this block to use as a starting point make your own

valve cover and other goodies w/ styrene and tubing


and ur not alone im trying this myself w/ a turbo though

[DSM-Mark]

Originally Posted by AstroRide44

and also what is that black pipe u made for? and the way u have the pipe coming off the turbine, i should rotate it to face down right?

Sorry, I should have clarified that black line in my post... I just put it there to show that the silver pipe is no longer necessary (ie, it's not continuous). The black line is just meant to split it into two separate pieces (sorry, I'm having a tough time explaining that!)

[weaponCIVIC]

?????why are you putting a itr engine in it?the engine you see in that pic is the s2000 engine wich is 50 hp more than the itr....

[AstroRide44]

read the whole thread buddy

[Jay!]

I took a 1/25 ITR block and put it next to the valve cover part from a 1/24 diecast S2000. The ITR is way short in comparison, so you'd really need some way to lengthen or build up the block, but you cuold probably fake it. Though between the intake parts in the ITR kit and the molded-in S2000 intake parts you could build-up the rest of the bay fairly decently... You'd be making the headers from scratch, though, but if you're looking for f/i that's a given... Then just use the fake bottom end in the S2000 kit to round it out.

Not easy, but it could work...