96-98 Ka24de-t

[Dorikin]

Welcome back kevin!

As you can see, Brians a mod, and im still doing the same old thang, beating on newbs and ricers

[Suislide]

Originally posted by Dorikin
Welcome back kevin!

As you can see, Brians a mod, and im still doing the same old thang, beating on newbs and ricers

he's been back for around a week now, dude...

[Soyo]

who makes the best engine internals?

[J SPEC SilEighty]

hehe thanks for the welcome back guys. and to help cornykorn21 a little, here are some places to get the parts on the list that Tat made.

1: turbo manifold Turbo Boss, Tom Rice's Manifold, Unstable Hybrids
2: turbo charger Cheap Turbo (great prices). shit you can find turbo's almost anywhere these days.
3: oil receiving and returning lines with all T ing hardware Any Turbo has oil line kits
4: external wastegate (optional if you have a internal wastegate, but a must if you have no wastegate ) HKS, Cheap Turbo - Tial Wastegates, Greddy Once again, you can find wastegates almost anywhere.
5: piping - Most piping will have to be made custom fit to your car by a shop but I believe that FMAX does have a piping kit available for the KA. It will all bolt up as long as you use the same turbo and intercooler that they are using. Their kit uses a T3/T04E IIRC.
6: turbo pipe coupling Turbo Hoses
7: fuel pump Walbro. walbro pumps can be found almost anywhere but srswap was the first place that popped into my head, Aeromotive
8: fuel management unit - you can use piggy back untis like the Greddy E-Manage, smaller fuel controller's like the Greddy S-AFC (can be found almost anywhere), or if you are loaded with cash then you can get a complete stand alone EMS like the new Electromotive Tec3 orHaltech
9: larger injectors ( optional ) - CIP Motorsports has a wide range of injectors available. most larger sized injectors will be top feed so you will need to either get a custom top feed fuel rail made or you can buy a pre-made one from Unstable-Hybrids
10: intercooler (optional) PWR Intercoolers, XS Engineering, Spearco Intercoolers
11: blow off valve - many to choose from like Greddy, HKS, Blitz and many many more
12: lots of vacuum lines and T's - Turbo Hoses
13: heat shields - buy some metal at lowes and cut out your own
14: header wrap - Hiper Parts
15: guages ( air fuel ratio, and boost/vac guage ) - Auto Meter
16: gaskets ( manifold to block, downpipe, turbo to downpipe and turbo to manifold ) -
Mr Gasket or any performance shop in your area should have these.
17: and the almighty 3 inch downpipe - Most likely will need to be custom made unless if you get parts from a kit that may include the downpipe.
18: almost forgot, the pipe that diverts the gases from the wastegate to the downpipe. - Custom made once again because it will depend on where you mount your wastegate and where you want it to enter your downpipe. Or you can just say "Screw running the exhaust gases from the wastegate through the cat" and you can run an open atmo wastegate.

[TatII]

*clasps hands* bravo jspec, once again you are the most informative member in our community good job