 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
05-29-2011, 05:26 PM
|
#1 | |
|
AF Newbie
Join Date: May 2008
Location: Phoenix, Arizona
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Having starting issues after new head install
I just had a new head put on my '01 2.2 Rodeo how do I double check to make sure both cam sprockets and the crank shaft are timed right?
Thanks in advance. Gina Last edited by IsuzuGal; 05-29-2011 at 06:29 PM. |
|
|
|
|
05-30-2011, 08:58 PM
|
#2 | |
|
AF Newbie
Join Date: Aug 2008
Location: goose creek, South Carolina
Posts: 42
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Having starting issues after new head install
you should be able to put a timing light on it. but if not a local shop should be able to tell you
|
|
|
|
|
|
05-31-2011, 07:34 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: May 2008
Location: Phoenix, Arizona
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Having starting issues after new head install
Thanks for your reply. There is no distributor -it's all computerized.
We're trying to figure it out on our own + it won't make it to a shop.  I did a compression test: cylinder 1 190psi cylinder 2 190psi cylinder 3 185psi cylinder 4 200psi |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
