|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| F-Body Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
01-22-2011, 08:01 PM
|
|||
|
|||
|
TBI to TPI swap, now running rich
A few years ago I swapped out my 305 throttle body injection from my 1991 camaro for a tuned port injection from a 1987. I also got rid of the 305 and upgraded to a 350 ci. I bought a painless wiring harness for all of the new sensors, I replaced the fuel pump for the proper one, I replaced the no-working fuel injectors with 24lbs ones. Ever since I finished the swap it has run extremely rich. I followed all of the steps in the painless wiring manual and am out of ideas, I've replaced almost every sensor. Any help would be great, thanks.
|
|
#2
01-24-2011, 09:33 AM
|
||||
|
||||
|
Re: TBI to TPI swap, now running rich
Coolant temo sensor is usually the first cuplret in a rich condition. However, if memory serves, the largest injector you can run without having to tweak the ECM Ithought was 22 lbs?
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
