|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
Caution: Monkeys bite!
![]() |
Part Time indication
Firstly, thanks for reading.
2004 Grand Cherokee 4wd, 4.0, 88k miles. It's got the part time transfer case (2wd, 4wd Part Time, 4wd Full Time, Neutral, 4Lo) I'll say first that the TC is working correctly, engaging and disengaging 4wd normally. The problem is in the indication on the dash. The "Part Time" light stays on in 2wd, but the light goes out in 4wd Part Time. It indicates correctly in 4wd Full Time, Neutral, and 4Lo. This has never happened before and started after driving on the beach in 4Lo last weekend. Less than 15 minutes of movement on the beach. When getting back to pavement, the light stayed on. I could understand if a sensor is malfunctioning and leaving the "Part Time" light on all the time. But that doesn't seem to be the case. Ideas?
__________________
Ours: 2020 Jeep Wrangler 2.0, 53k 2013 Toyota FJ Cruiser, 84k Kids: 2005 Honda CRV, 228k |
|
|
|
|
|
|
#2 | |
|
AF Regular
Join Date: Apr 2008
Location: Yuma, Arizona
Posts: 257
Thanks: 1
Thanked 8 Times in 8 Posts
|
Re: Part Time indication
How about the shifter not being in correct adjustment to turn out the light. Or maybe a pinched wire. Just guessing.
|
|
|
|
|
|
|
#3 | |
|
Caution: Monkeys bite!
![]() |
Re: Part Time indication
Thanks; but this problem had never occurred until the last 4wd session on the beach, and I wasn't deep enough in the sand for it to drag on the transfer case or trans.
__________________
Ours: 2020 Jeep Wrangler 2.0, 53k 2013 Toyota FJ Cruiser, 84k Kids: 2005 Honda CRV, 228k |
|
|
|
|
| |||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
| Thread Tools | |
|
|