Where to mount amp...?

SilverY2KCivic · #1 12-27-2001, 02:00 AM

Got a sweet Infinity amp for X-mas from my cousin and her fiance.

I'm gonna attempt to install it myself by this weekend, going to get an amp wiring kit tomorrow. Other than figuring out where I'm gonna conceal the power cables to the amp, I dunno where I should mount it.

Wiring the amp up, I'm expecting to be a piece of cake, as I'm pretty good with basic electronaics, and wiring things up. Suggestions I've heard on where to mount it, are on the back of the rear seatback, and then have the sub butted up against it (I have a 2000 Civic coupe by the way), I've also been suggested to just mount the amp directly to my subwoofer box I'm gonna be hooking the amp up to. I would like to install it that way (to help maximize trunk space) but maybe I'm under the wrong assumption here, but if mounted directly to the sub box, wouldn't the vibrations coming from it, not be good for the amp to experience? Ir does it not matter? Also where might you all suggest I mount this bad boy? Thanks.

Oh, and for those remembering "hey, Infinity doesn't make amps anymore..." Your right, well not for the US at least.

Yup, the amp I have is a Euro spec amp, model RA7502.

xivera · #2 12-27-2001, 02:17 AM

If this amp is strictly for your sub, mount it on your sub box given that it is made of MDF. (I forget the thickness...)

SilverY2KCivic · #3 12-27-2001, 03:19 AM

Quote:

Originally posted by xivera
If this amp is strictly for your sub, mount it on your sub box given that it is made of MDF. (I forget the thickness...)

Yeah, the box I have is made from "¾ MDF particle board (or is it just called MDF?) Anyways, yeah, it's made out of what it should be, and to the recommeded specs.

sparq · #4 12-27-2001, 02:10 PM

Quote:

Originally posted by SilverY2KCivic

Yeah, the box I have is made from "¾ MDF particle board (or is it just called MDF?) Anyways, yeah, it's made out of what it should be, and to the recommeded specs.

Particle board is not MDF...

Its only about HALF as dense as MDF and should not be considered a substitute. "Well wood is wood" is not a correct statement. Make sure its REAL MDF... knock on it, the box should NOT sound hollow, it should sound basically like it were a tank. You should hear a THUD rather then the hollow sound. If you built the box yourself, a good way to tell is by how much dust was created. If you used a power saw, you should have more dust and debris then you know what to do with ~ even after just one cut. This is because as you know, MDF is just sawdust and glue under extreme pressures... Particle board would still create a dust, but you shouldnt see nearly as much as MDF is more dense.

BUT, no mounting the amp to the box shouldnt cause any problems. I hate mounting amps to the box for the simple fact it just makes it THAT much easier for a theif to steal everything out of your car. If he sees he has to lean into your car and unscrew the amp from the back seat ~ if the theif feels as if there isnt enough time you would only be out a subwoofer box. Word to the wise, ALWAYS ALWAYS ALWAYS BOLT your subwoofer box to your car...

kicker1_solo · #5 12-27-2001, 03:52 PM

I like amps on the back of the seat, here's a picture of how I had mine.
http://briefcase.yahoo.com/bc/anonym...c=bc%26.view=t

igo4bmx · #6 12-27-2001, 04:00 PM

you have a 6th gen coupe?

pull up your carpet in your trunk. look for yous spare and then thearea where the jack hides. between that area is alot of space to mount an amp. it will be hidden and keep space available in your trunk

SilverY2KCivic · #7 12-27-2001, 09:33 PM

Quote:

Originally posted by sparq

Particle board is not MDF...

Its only about HALF as dense as MDF and should not be considered a substitute. "Well wood is wood" is not a correct statement. Make sure its REAL MDF... knock on it, the box should NOT sound hollow, it should sound basically like it were a tank. You should hear a THUD rather then the hollow sound. If you built the box yourself, a good way to tell is by how much dust was created. If you used a power saw, you should have more dust and debris then you know what to do with ~ even after just one cut. This is because as you know, MDF is just sawdust and glue under extreme pressures... Particle board would still create a dust, but you shouldnt see nearly as much as MDF is more dense.

BUT, no mounting the amp to the box shouldnt cause any problems. I hate mounting amps to the box for the simple fact it just makes it THAT much easier for a theif to steal everything out of your car. If he sees he has to lean into your car and unscrew the amp from the back seat ~ if the theif feels as if there isnt enough time you would only be out a subwoofer box. Word to the wise, ALWAYS ALWAYS ALWAYS BOLT your subwoofer box to your car...

What I have IS MDF, I wasn't sure if was just called MDF or MDF something else. Anyways, I know wood isn't just wood, I play drums, and so that's one of the first things you just know. Anyways, when thinking about mounting the amp to the box, the theif issue came to mind as well, with me. SO I'm more leaning towards NOT mounting it to the box itse;f. I think the space next to the spare, like mentioned above sounds like a good place to mount it. I'll check it out, and see if the amp will fit there or not.

kicker1_solo · #8 01-01-2002, 08:14 PM

get it in yet? Have any pics yet?

SilverY2KCivic · #9 01-02-2002, 01:52 PM

Quote:

Originally posted by kicker1_solo
get it in yet? Have any pics yet?

Yup, got it in on Dec. 30th!

I ended up mounting it under the trunk floorboard, betweem the spare tire, and the jack, It's out of the way, fits PERFECTLY there, and it's harder to find.

I drilled holes in the bottom of the trunk pan, and mounted the board to there, thatr I have the amp mounted to. I'll have pics of it hopefully later tonight. The install itself was rither easy, well all the wiring, and running the cables for it, drilling and mounting the dang mounting board for it, was the hardest part.

igo4bmx · #10 01-02-2002, 02:34 PM

yay you took my idea!!

kicker1_solo · #11 01-02-2002, 05:19 PM

wow, sounds cool. Can't wait for the pictures....

SilverY2KCivic · #12 01-02-2002, 06:23 PM

Quote:

Originally posted by igo4bmx
yay you took my idea!!

And an excellent one it was, thanks for the suggestion of it.

xivera · #13 01-03-2002, 03:36 AM

You know what would've been nice?

Maybe... you could've put some light wood (or something... some sorta cover-like-thingie) to surround the amp so it seems recessed... or something...

spy54 · #14 01-03-2002, 04:20 AM

so where are the pics man!!

igo4bmx · #15 01-03-2002, 08:41 AM

Quote:

Originally posted by xivera
You know what would've been nice?

Maybe... you could've put some light wood (or something... some sorta cover-like-thingie) to surround the amp so it seems recessed... or something...

what i'm gonna do it lay fiberglass to make a mold of the floor.
paint it, mount amps on it in some layout. that area will be covered with a plexiglasscover.

Thread Thread Starter Forum Replies Last Post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is it Safe to mount amp to enclsure, permanently?	alkemist	Car Audio	2	02-08-2007 06:59 PM
Where to mount amps	slantyshanty	Pathfinder \| Terrano \| QX4 \| Xterra \| Patrol \| Safari \| X-Trail	7	11-04-2005 03:44 PM
Mount amp on back of seats?	BoNkA10	Audio and Videos	7	08-08-2005 01:45 PM
Mounting Amp On Sub Box	ViperJ	Car Audio	13	12-19-2004 06:13 PM
Wheres the amp	skamxxiii	Explorer \| Explorer Sport Trac	2	12-31-2003 11:23 AM

POST REPLY TO THIS THREAD