what5 tools do i need to remove and 88ish integra fron lip

Redline_civic91 · #1 06-07-2003, 10:27 PM

k i past by this small little junkyard today and i've noticed that this 88 or so year teg is just always parked there in the back outside the junkyard i think its crashed or something but it just sits outside its not even in the junkyard its in the back. im thinking bout running up there and grabing that lip. i know some my flame me for this, but i do intend to ask the guy if thats even there car and how much he would take for the lip. if he says its not for sale then im gonna go to plan b. btw would that lip even fit my 4 door?? k but what tools do i need.

Melt · #2 06-07-2003, 10:31 PM

yes the lip will fit your 4 door ... and I dont know what you need ... 88civic_dx should know cause he put one on his hatch.

Stali08 · #3 06-07-2003, 10:33 PM

yea dont dude, just go to groupbuycenter.com and look for some cheap springs

daddys · #4 06-07-2003, 10:35 PM

just bring your ratchet set,,at least thats all i used

Melt · #5 06-07-2003, 10:35 PM

Quote:

yea dont dude, just go to groupbuycenter.com and look for some cheap springs

wrong thread meng

http://www.automotiveforums.com/vbulletin/t108789.html

Redline_civic91 · #6 06-07-2003, 10:43 PM

Quote:

Originally posted by Stali08
yea dont dude, just go to groupbuycenter.com and look for some cheap springs

Stali08 · #7 06-07-2003, 10:47 PM

Ha ha....yea

91civicDXdude · #8 06-08-2003, 12:19 AM

10mm socket.

GTA · #9 06-08-2003, 01:08 AM

Quote:

Originally posted by 91civicDXdude
10mm socket.

what he said. try and grab the mounting stuff too the bolts and the things they go into.

91civicDXdude · #10 06-08-2003, 01:11 AM

1. remove bolt

2. remove clip that holds bolt

3. remove lip

4. bolt on your car

5. trim edges and drill one hole for the most rear located mounting point.

6. you are done.

MyFirst4G · #11 06-08-2003, 02:51 AM

If you jack it after you specifically aswked him to buy the lip and he says NO, and then the next day its not there, dont u think they will think of YOU!? and if they got a camera on their lot so when u go you'll probably spotted.......

Redline_civic91 · #12 06-08-2003, 05:59 AM

nah this place does not have camaras trust me. they probley forgot the car is even out there. btw i looked and it has its ls motor still in tach im thinking about taking that tranny out for the 5th gear im gonna still the lip first though

cause its pretty simple and those mexicans dont even know english i doubt they can tell the little lip is missing and if it was they probley wont care. but after i get the lip im gonna hit them up and ask them for the tranny.

thnx 91civicdx for the reply and everyone else.

Melt · #13 06-08-2003, 12:01 PM

ali has a point ... if you ask for the lip and then steal it they might be able to figure it out ... good luck anyways though

Rufes1 · #14 06-08-2003, 12:03 PM

Quote:

Originally posted by Stali08
yea dont dude, just go to groupbuycenter.com and look for some cheap springs

I dont know how u managed to do such a stupid thing ahahha

Redline_civic91 · #15 06-08-2003, 03:19 PM

im taking the lip tonight. hopefully everything goes good. and tomorrow im gonna ask for the tranny.

Thread Thread Starter Forum Replies Last Post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3.5L V-7 Compressor Removal and Reinstallation	krivasauto	Intrigue	2	05-13-2010 10:45 PM
Special tool needed for removing fuel lines?	HighMileage230000	Windstar	5	05-18-2009 11:59 AM
special tool needed for front brake pad removal?	not.a.mechanic	El Camino	1	07-23-2007 08:07 AM
integra fron end/prelude tail light projection?	teck	Exterior \| bodykits \| Lighting	3	07-28-2002 02:02 PM
looking 4 type R fron lip	sal	Integra	1	07-01-2002 06:43 PM

POST REPLY TO THIS THREAD