 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Forced Induction Discuss topics relating to turbochargers, superchargers, and nitrous oxide systems. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
04-08-2002, 10:05 PM
|
#1 | |
|
Banned
Join Date: Feb 2002
Location: Elgin, Illinois
Posts: 1,077
Thanks: 0
Thanked 0 Times in 0 Posts
|
Long term engine life with turbo. PLEASE READ!!!!!!!!!!!!!
I have an 02 civic ex. I have yet to find a company that makes a turbo for my car but i want one when they come out. I have a stock engine and dont want to swap. I was wonderin if anybody knows what if any are the long term damages with a turbo on my engine. HOW LONG WILL IT LAST?
|
|
|
|
|
04-09-2002, 12:29 PM
|
#2 | |
|
AF Enthusiast
Join Date: Feb 2002
Posts: 152
Thanks: 0
Thanked 0 Times in 0 Posts
|
it all depends on how much boost you run and if you're going to build up the bottom end first. another important factor is to upgrade the fuel side. considering you want to run on stock internals, dont run more than 7 or 8 psi but you're still gambling on whether you blow it or not. upgrading the fuel stuff is a must and i suggest building up the bottom end to handle the boost if you want to make sure you dont blow your engine.
|
|
|
|
|
|
04-09-2002, 02:18 PM
|
#3 | |
|
AF Fanatic
Join Date: Dec 2001
Posts: 2,678
Thanks: 0
Thanked 0 Times in 0 Posts
|
You should be safe to run 7PSI just fine. As you build up the motor then you can start running up to 10PSI and higher.
__________________
1989 s13 Fastback Tein HE coil-overs sr20det swapped! JIC Magic Front and Rear Strut Bars Slotted and Cross-drilled Rotors S/S Brake Lines Pivot Lazy eye controller Blitz LM Intake Blitz D1 Spec Turbo Timer Soon to come: Sard 550cc Injectors Blitz Nur Spec Exhaust Blitz Down pipe HKS FMIC http://www.driftmonkey.com (Part Owner) |
|
|
|
|
|
04-09-2002, 03:31 PM
|
#4 | |
|
AF Enthusiast
Join Date: Feb 2002
Location: Mission, Kansas
Posts: 446
Thanks: 0
Thanked 0 Times in 0 Posts
|
Most important thing to watch with turbo (or any FI) = a/f gauge.
Go lean and melt your engine into the oilpan. Correct me if im wrong on this issue. |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
