Our Community is over 1 Million Strong. Join Us.


blinker problems


junkthatmoves
11-17-2006, 05:32 PM
I have an 89' grand marquis. Im having problems with the turn signals. I have replaced all the taillight bulbs, flashers and there are no blown fuses and I still cant get the turn signals to work. The hazard lights work so Im pretty sure that there isn't a problem with the circuit so Im wondering if there is a hidden fuse link anywhere that might need replacing or if the whole signal switch on the steering column is bad. Before I have to chase wires I want to know what i can try before I start that process.

BNaylor
11-18-2006, 09:01 AM
Welcome to AF.

Your post has been moved from Car Buying Q & A to the proper forum, Mercury Grand Marquis. See link below.

http://www.automotiveforums.com/vbulletin/showthread.php?t=645039

Vanagon-tom
11-18-2006, 09:49 AM
Did you fix the problem? I had the same problem on my car. It ended up being the 4 way hazard switch. Hold down the 4way hazard switch and see if the turn signals works. If you look on most wiring diagrams, the turn signals and the 4 way hazards tie together.


[
quote=junkthatmoves]I have an 89' grand marquis. Im having problems with the turn signals. I have replaced all the taillight bulbs, flashers and there are no blown fuses and I still cant get the turn signals to work. The hazard lights work so Im pretty sure that there isn't a problem with the circuit so Im wondering if there is a hidden fuse link anywhere that might need replacing or if the whole signal switch on the steering column is bad. Before I have to chase wires I want to know what i can try before I start that process.[/quote]

KimMG
11-19-2006, 03:47 AM
Make an enlarged copy of the wiring diagram, test each component in the circuit until you find the fault.

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food