Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
JDM Motor & Parts info/chat Discussions on Mugen, Spoon etc. Plus, info on motor swaps (b18 's, b16's h22's etc) and other JDM info! |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-16-2006, 10:05 AM | #1 | |
AF -Advisor
|
VTEC: "How to"
How to Spell VTEC
(VTAK VTECH VTEQUE) This write up assumes you have a modern "QWERTY" keyboard and can identify english letters. The Pictures are Thumbnails, click to make them larger. The first step is to locate the letter V. This in in the second row of keys from the bottom, between the C and the B. After you have located the V you need to press the key down and release it. This is what should be on the screen. V If you have that then we can continue, if not press "Backspace" and start again from the begining. The second step is to locate the T key. It is in the top row of letters, just below the numbers. It is between the R and the Y. It is below the numbers 5 and 6. After you have located the T you need to press the key down and release it. This is what should be on the screen. VT If you have that then we can continue, if not press "Backspace" and start again from the begining. The third step is to locate the E key. It is 2 keys to the left of the T between the W and the R. It is beneeth the numbers 3 and 4. After you have located the V you need to press the key down and release it. This is what should be on the screen. VTE If you have that then we can continue, if not press "Backspace" and start again from the begining. The fourth and final step is to locate the C key. It is back in the lowest row of letters, to the left of the V we used in step one. It is between the V and the X and above the left end of the Spacebar. As in the 3 previous steps, once you have located the C you need to press and release the key. You should have this on the screen. VTEC If you have that then you are done, continue on with your post. If you have any questions please post them up and I will try to assist you.
__________________
2015 DGM STi - 2006 SGM STi - 1999 Built/boosted GSR |
|
01-16-2006, 03:22 PM | #2 | |
AF Newbie
Join Date: Aug 2005
Location: lodi, New Jersey
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: VTEC: "How to"
lol
|
|
01-20-2006, 06:05 AM | #3 | |
AF Enthusiast
|
Re: VTEC: "How to"
ahaha nice Schister66 this should be made a sticky
|
|
01-20-2006, 07:25 AM | #4 | |
AF -Advisor
Thread starter
|
Re: VTEC: "How to"
Sticky Me!
__________________
2015 DGM STi - 2006 SGM STi - 1999 Built/boosted GSR |
|
01-20-2006, 01:22 PM | #5 | |
AF Enthusiast
Join Date: Sep 2005
Location: Dallas, Texas
Posts: 161
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: VTEC: "How to"
__________________
At the time, McLaren was racing successfully with Honda engines, and it seemed logical to approach Honda for an engine meeting Murray's requirements. But the Japanese declined, feeling that they could not spare the capacity to develop such a project. |
|
01-20-2006, 03:26 PM | #6 | |
AF Regular
Join Date: Jun 2005
Location: Oakland, California
Posts: 251
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: VTEC: "How to"
VTECH... Dang it I messed it up again! Too dang hard I say.
|
|
01-20-2006, 05:35 PM | #7 | |
AF -Advisor
Thread starter
|
Re: VTEC: "How to"
its ok....calm down and follow the instructions, you'll get it!
__________________
2015 DGM STi - 2006 SGM STi - 1999 Built/boosted GSR |
|
01-20-2006, 05:41 PM | #8 | ||
Master Connector
|
Re: VTEC: "How to"
Quote:
Why not, Im bored and needed a good laugh
__________________
Connecting the Auto Enthusiasts
|
||
|
POST REPLY TO THIS THREAD |
|
|