Modifications list

[TorchedStealth]

I know most of us have our mods listed in our sigs, but I i thought I would start a thread for everyone to post up what mods they have done to their car and near future plans. Ill start it off. My mods include:

Engine:
60# injectors
2.7" & 2.8" pulleys (depending on time of year)
Aqua stealth meth injection
vibrant header and catless downpipe
mix-matched companies pieces to form a 2.5" cat back lol
homemade 3" intake
N2MB WOT box
cobra heat exchanger
ingalls torque damper
poly trans mounts
HPtuners

Interior:
Aeroforce Interceptor
AEM EUGO wideband
JSC dual steering gauge pod
Hurst short throw

Exterior:
CiNcity headlights
Mop Top Pros carbon fiber badges
HD front lip
smoked taillights and front corners

In the mail coming this week:
Hahn 3" catback
80# injectors

In storage waiting for my funds to grow:
Complete brand new LSJ....wait wha?

[Polygon]

GTC:

Engine:

MSD Blaster 2 Coil
Magnecore Wires
NGK Iridium Plugs
MBC @ 14 PSI

Trans:

Turbos Unleashed 4-Puck Clutch and Stage 2 Pressure Plate

Suspension:

Poly Motor Mounts
Poly Trans Strut
Poly Bushings
Koni Reds
Ebiach Pro Kit
CS Racer Solid Adjustable Track Bar
All Under Body Metal Powder Coated Black

Brakes:

ATE Super Blue Fluid
Hawk HPS Pads
SS Flex Lines
SS Hard Lines
Powder Coated Calipers Red

Exterior:

Hankook Ventus RS-2 225/45
Konig Trouble 17x7"
Window Tint @ 25/50
House of Kolor Paint

Exhaust:

Full 3" Mandrel Bent SS Pipe
Catco 3" Cat
Dynomax Race Bullet 3" Muffler
Borla Intercooler Tip

There's still a lot of crap to go on I just ran out of time, and next year the focus is the engine and interior.

Stealth:

Engine: Free Boost Mod

Stereo:

Head Unit: Clarion DXZ785USB
Mids (6 1/2")/Tweets (1"): Focal 165KF Components
Rears (6" x 9"): Polk dB650
Amp: Rockford Fosgate Punch 200-2
Antenna: Shark Attack 2
Rear Wiper Delete

Exterior:

Falken Azeni RT 615 255/40
5Zigen FN01R-C 17x9"

There's quite a few things I have lying around to go on, just focusing on the GTC for now.

[-The Stig-]

'71 Camaro:

Motor: N/A

Trans: N/A

Suspension/Chassis bits:
Powder coated sub frame
All new Moog steering linkage
Detroit Speed upper and lower A-arms
Hotchkis front coils
Hotchkis rear leafs
Hotchkis/Bilstien front and rear shocks

Global west aluminum body mounts

All new gm door hinges(not yet installed

Brakes/Wheels/Tires/Diff:

Kore3 C5 front disc brakes
Kore3 C5 rear disc brakes / with parking brake
Kore3 Stainless brake hoses

17 inch Vintage wheel works V40's
Nitto NT555's 245 front 285 rear
Everything in rear diff is new: Moser axles, Eaton posi, GM 3.42 ring and pinion, all new bearings.

Stereo: N/A


Also missing a Fender and a few key body parts at the moment. In the process of planning the next steps. Have to repair some slight cancer on the front cowl where the dash meets the A-Pillar. Nothing major, just requires welding in a new cowl and some skill. Car will probably be out getting that repaired soon and getting all new weather stripping and a new windshield, along with getting all body panels installed and properly aligned along with new door hinges installed.

After that, the fun stuff... piecing together an engine.

[VR43000GT]

1994 3000GT VR-4

* K&N FIPK Intake

* Greddy Type S BOV (Recirculating)

* Stillen downpipe with all 3 cats gone

* MBC @ 14.5 psi

***IPS Single Shot Exhaust Coming Soon***

[Sleepr awd]

Wiseco Pistons 8.5:1
Scat Rods
2.4 Block w/ 2.0 Turbo head (will be swapped with ported head soon) .20 over
stock 2g camshafts (swapping in 280s when the ported head is ready)
massive intake mani unknown brand
HX40
Greddy BOV
3" intercooler piping
massive intercooler
3" turbo back
17" Motegi wheels w/ Nitto NeoGen tires
MBC w/ stock BCS for dual stage boost control
DSMLink v. 2
4 bolt rear
Battery located in trunk
Coil on plug ignition (no name)
Ralliart seats and 4 point belts
Greddy turbo timer
GVR4 Whiteline springs (not avail anymore)
Kybs ? they are old
front and rear strut tower bars
JDM corner lights

sorry i dont' know exact brand stuff or specs on most of it, as most of it came with the car.

Should be good for 10s in early spring.

[CassiesMan]

2008 Mazdaspeed3

CPe Cold Air Intake
Corksport Catback
Mrlilguy CDFP
Centrix Front Rotors
Hawk HPS+ Front Pads
Mazdaspeed6 OEM wheels


Plans:
-Matching tires (currently Falken front, Kumho rears)
-New wheels (front driver's side wheel is all rusty from the brake thing, probably getting some cheapo FD wheels)
-New plugs (currently spitting and popping and hesitating like nothing)
-Silicone piping and better clamps for the intercooler
-Isolate boost leak and fix it
-Maybe a new BOV and turbo inlet pipe
-Just might be getting to beta test a new software solution for the Speed3
-Sell the car and get an M3 (E46 or E9x) or 335i coupe

[BP2K2Max]

The Maxima:
Cattman cat-back exhaust, advanced timing to 17 degrees BTDC, tokico illumina Struts, H&R lowering springs, Konig Theory 19" Rims, and replaced the open diff tranny with a factory HLSD tranny.
coming soon: a new downpipe, and possibly a WAI.
The Ninja:
Akrapovic Slip-on Exhaust, Power Commander III USB with custom map, ECU Jumper, Flush mount Front blinkers, VFX Tail light with integrated turn signals
future mods: GPR Steering Stabilizer

[TorchedStealth]

Awesome guys, keep it coming! I got my hahn catback on this week and realize why people pay $700 for this piece new (I didn't pay bear that lol). I'll post a vid of a sound clip today

[Chiquae07]

2001 Nissan Sentra SE

Place Racing CAI
HKS Catback
Brembo Sport front pads
Axxix/pbr metal master rear bads
Brembo blank rotors
technofit stainless steel lines
06 rear conversion
03 spec v front conversion
wheel hop eliminator cross member spacers
window weld filled motor mounts
Ultra wire spark plug wires
nismo rad cap

painted satin black interior
spec v cluster

summer wheels:
Brig Magline 8s
Bridgestone Potenza Grids

winter wheels:
15'' nissan altima steelies
195/60/15 winterforce pro
205/55/15 blizzaks

plans:
get rid of the thing after winter or if i keep it:
nismo control arms with bushings and ball joints
oem tie rod ends
nismo coil overs
nismo rear sway bar
nismo front sway bar
repaint car

[Sleepr awd]

Fix boost leak!!! Only having 19psi to play with is disappointing . I need around 30 bahahahahahahahahahah

[TorchedStealth]

Haha get that boost!

Cassies may hate me for this but I put in my 850cc injectors tonight and filled the tank with E85 and began the tuning journey. Got the car running decent so far and its already taking all the timing that it ever did with meth and more without any knock. Even on a conservative unworked tune she pulls pretty decent

[CassiesMan]

Just don't cry to me when your fuel lines all start melting, lol.

I'm trying to set up a time to get together with a friend of mine who has already basically torn a Speed3 motor down two or three times, and he knows all the places this thing can leak from. He also does sales for an aftermarket vendor, so I'm getting the hook up on new spark plugs, and he is gonna see what he can do for me on a turbo inlet pipe and samco intercooler hoses. Hopefully I'll be back to everything being good in the next two weeks.

Oh, and Happy Thanksgiving everyone. Are the holidays over yet?

[TorchedStealth]

My fuel lines should be ok lol

Happy Thanksgiving everyone!

[cHo]

1992 Dodge Stealth RT Turbo

Exterior:
Spray can Flat Black
18x9(.5 I can't remember..) Gramlights w/ Rays Engineering ultra light race lug nuts
99 3000gt Front Bumper
99 3000gt Turn Signals
94 Stealth Glass Headlights
2nd Gen Hood
Tint
Megan Racing Coilovers
Stock Spoiler Removal

Interior:
Roll Bar
Ciance 3 gauge A pillar w/ AEM WB/Prosport Boost and EGT
Pioneer In-dash DVD

Engine:
CX Racing FMIC
CX Racing Radiator
Evo 3 16G Turbos
IPS TD05 Manifolds and Precats
Southbend Stage 4 6 puck clutch w/ IPS ultra lightweight flywheel
DSM Blacktop 450s
KN Air filter
Blitz DSBC Type R
Apexi SAFC 2
A/C deleted
MSD spark plug wires
1 piece CFDS
Custom DP combined with e-cutout and stock catback

Waiting to install:
AEM AFPR with custom adaptor
Fuel Pressure Gauge
Stainless Steel Brake Lines w/ Motul 600 brake fluid
Greddy Emanage Ultimate w/ Map Sensor and GM IAT
Need to order new SS line for my rear turbo as it cracked somehow and its leaking..

Future:
AEM Water/Meth kit
660s
More gauges
Custom front mount oil cooler with AN lines/fittings
And theres more but I can't think of it off the top and I gotta go...

Oh and FYI my car is completely stock and I'm just screwing around.. Yes, STOCK because its illegal to modify your car in pretty much anyway in CA. Sorry for me to have fooled any of you.
Car is somewhat color matched..

[TorchedStealth]

Lol stock...I swear it is officer!