 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
01-20-2008, 12:43 PM
|
#1 | |
|
AF Moderator
 
Join Date: Sep 2004
Location: syracuse, New York
Posts: 11,311
Thanks: 3
Thanked 11 Times in 10 Posts
|
3.4 engine intake gasket repair info.
Here is a helpful link for those undertaking the dreaded intake gasket replacement.
http://www.d-tips.com/General/Articl...sket/art10.art
__________________
Thought for the Day… Alcohol does not make you fat - It makes you lean... against tables, chairs, floors, walls and ugly people.  If a prostitute here in America loses her job to a prostitute in India , is that considered "outwhoring"??-Jay Leno |
|
|
|
|
06-29-2008, 09:52 AM
|
#2 | |
|
AF Newbie
Join Date: Oct 2005
Location: Newcastle, Washington
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 3.4 engine intake gasket repair info.
Just finished a 3.4 intake repair ('98 Silhouette), cannot test my repair as I have no spark. Cam sensor plug shows power on (pink wire) w/ key on, the other side 4-pin plug on the ICM has no power w/ key on, should that side have power also? History: replaced the spark plugs during the intake repair. Had no ingintion problems what so ever prior to the intake repair. Fuses all look OK. Had a slight contact spark off the alternator & valve cover during disassembly (forgot to disconnect the battery). The van only has 89k miles on it, ran great prior to the intake gasket issue. Any suggestions would be greatly appreciated.
|
|
|
|
|
|
11-15-2008, 12:59 PM
|
#3 | |
|
Newbie mod
Join Date: Dec 2004
Location: Toronto
Posts: 1,477
Thanks: 0
Thanked 2 Times in 2 Posts
|
Re: 3.4 engine intake gasket repair info.
I tried once jsut to leave the battery hooked up, while doing an intake repair. First and last time. Shorted a wire (I don't remember exactly which one), put it back together only to find I fried the PCM on the truck. Learned the hard way.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
