Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Maintenance problems, fixes. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-14-2006, 09:37 PM | #1 | |
AF Newbie
Join Date: Mar 2002
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
'94 G20 AC/Heater Fan
'94 G20 AC/Heater fan only runs on 4/high will not run on 1/low 2/mid or 3/mid-high. Is it the fan motor or switch or something else. Thanks for any help you can give.
|
|
03-14-2006, 09:44 PM | #2 | |
AF Newbie
Thread starter
Join Date: Mar 2002
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: '94 G20 AC/Heater Fan
DAH! just read Readingsaint's post with the same prob. must be the resistor. Is the resistor located at the fan motor? Thanks again.
|
|
03-26-2006, 04:33 PM | #3 | |
AF Fanatic
|
Re: '94 G20 AC/Heater Fan
The blower motor resistor is over on the passenger side in the foot well under the glove box. Look in one of the other thread about replacing it. It's a VERY common problem on the P10 G20s.
__________________
Like a boy - but BETTER! 2005 Subaru Forester 2.5X 1997 Honda Civic EX Coupe Inform yourself: AF User Guidelines |
|
|
POST REPLY TO THIS THREAD |
|
|