Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-18-2012, 08:39 PM | #1 | |
AF Newbie
Join Date: Jun 2005
Location: Fountain Hills, Arizona
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
1994 Suburban power window problem
I have a '94 Chevy Suburban with a driver's side power window problem. The window will work for 5-10 seconds upon initial startup but once I stop and try to restart, the window won't do anything. If I pull up on the window while pressing the window switch it will start working again whereas I can let go of the window and keep the button depressed until I reach the desired level I want the window to be. At times I get nothing up or down by pressing the switch leading me to believe it's the motor. It seems to have the most trouble going up rather than down. I am not sure what the problem is, ie. regulator, motor, electrical relay. Any help would be appreciated
|
|
03-19-2012, 08:30 AM | #2 | ||
AF Fanatic
Join Date: Oct 2007
Location: EVERETT, Massachusetts
Posts: 10,898
Thanks: 8
Thanked 432 Times in 431 Posts
|
Re: 1994 Suburban power window problem
Quote:
with the NBS 2000 -2006 vehicles the window motor/reg are very much made to fail just after 3 yr/36,000mi.......... since it is failing constantly checking the voltage at regulator/motor input would confirm. could be the voltage drops at the sw because of wear. |
||
|
POST REPLY TO THIS THREAD |
|
|