Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-25-2004, 08:36 AM | #1 | |
AF Newbie
Join Date: May 2004
Location: Big Rapids, Michigan
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
'95 Monte Parts Interchange
Ok, changing the rear struts on my '95 Monte and find out the rear trailing arms are shot. Wonderful Michigan winters. I've been trying to find aftermarket replacements that are stronger than the flimsy stamped sheet metal that came stock. Haven't found much. So here's my question- Does anybody know where to find these?
I'm rough on equipment and would prefer to have something stronger. If I have to get junkyard replacements I am going to weld a plate on the bottom to box them. Thanks for any help. Last edited by SnafuOffRoad; 05-25-2004 at 12:48 PM. |
|
05-25-2004, 12:53 PM | #2 | |
AF Newbie
Thread starter
Join Date: May 2004
Location: Big Rapids, Michigan
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: '95 Monte Trailing Arms *Help*
I've been doing a little research. I'm wondering what suspension parts (sway bars, trailing arms, etc) are interchangeable between the '95-'98 Montes and the '00-'05 Montes. I've heard the trailing arms are the same. I've got a REALLY good deal on the heavy sway bars, trailing arms, and strut tower brace for a '00-'05 Monte. Will these fit my '95?
|
|
|
POST REPLY TO THIS THREAD |
|
|