Custom F-150 Lighting Build-up Thread

[Diesel2NR]

The picture above shows what I've done so far with the F-150. The Interior tub has been painted and I've applied Red Flocking (only somewhat apparent in the lighting). The steering wheel also shows my red and black color scheme. I've started the engine, but that's come to a halt since I'm out of glue. I've taken certain parts, such as the valve covers, and applied BMF to them. I also have the two wheels I'm trying to choose between, the nitrous bottle kit (which I have no idea how to put together ), hood pins, amps, and tonneau cover with speakers.

Here are my plans for this kit:

• Metallic Black with Metallic Stop Light Red Racing Stripes for exterior
• Red and black interior
• Replace the bench seat with a bucket seat from the Mustang Mach III Concept and a NO2 bottle
• put in a styrene wall to block off the bed and place 2-4 amps in the bed (2 on the wall, 2 on the tailgate) & add wiring
• carpet the inner tailgate and visible part of the bed
• add a wing (from Revell ITR) to the tonneau cover

I will most likely go with the larger, hoppin' Hydros wheels as trying to take the flash off of the kit supplied tires is beginning to be too much hassle.

[Purpura Delujo]

Sounds good so far, I like the subs and those hoppin hydros wheels. I would ditch the wing on the cover though.

[RyanGiorgio]

Cool. Update ua ASAP!

[Diesel2NR]

Here's the finished engine. I ran into the extra flashing problem that P-man did, especially with the fan. It took me 30 minutes to clean the fan up alone, and it's still not perfect, but acceptable to my standards.