|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
03-09-2010, 10:02 PM
|
|||
|
|||
|
2000 Blazer Exhaust
2000 Blazer LS 4door 4x4
I have a hole in the my muffler and have decided to replace it with a Flowmaster Super 44 muffler. I am trying to determine what the diameter of the exhaust pipe from the original mounting location and the diameter of the tailpipe going out. I also wanted to know how much of a pipe extension i would need to connect the muffler to the tailpipe. 
|
|
#2
04-24-2010, 10:24 PM
|
||||
|
||||
|
Re: 2000 Blazer Exhaust
The original pipe is 2.5in right after the cat-back flange for about 2in then reduces down to 2.25in before the muffler, 2.25in from there out. You will need a muffler with an Offset in/Center out layout if you are keeping a single exit exhaust, a universal muffler hanger, and about 18in or so of pipe depending on where you place the muffler.
__________________
2000 Chevy Blazer ZR2 Performance Mods: Numerous Suspension Mods: Some, but not enough Exterior Mods: Just Right 1987 Buick Turbo T Dark Red Low 11 sec sleeper  .030 4.1 block, PT6262E, & other odds and ends.... My Cardomain
|
|
 |
POST REPLY TO THIS THREAD |
| Tags |
| blazer , exhaust , muffler |
 |
|
|
