reprograming keyless entry for a 2000 chevy silverado 4wd

[mperkins20]

Can someone help me to reprogram my keyless entries for my truck. I sure would like someones help, so i would have to pay to have this done

Thanks Matthew

[volcom_084]

i was hoping sombody would post a solution becuase i am having the same problem. If you find out how to do it e mail me the instructions.....thanks a bunch

[mjgjr72]

you have to do all receivers at once. once reprogram mode is entered it erases all stored remotes
1 start with ingnition off, hold down the power unlock button on door panel. turn ignition key on,off,on,off, release power unlock button on the door panel. the locks will cycle once.

2 hold down the keyless entry transmitter lock and unlock buttons for 15 seconds. the locks will again cycle once.

3 repeat step 2 for each additional keyless entry transmitter.

4 turn ingnition on to exit the keyless entry transmitter proggramming mode.

check funtion of remotes

the second method requires scan tool

Report Post | IP: Logged