Current motor update :) "Pics"

[seth 90DX/ZC]

How did I ever get that black crap off the valve cover? Airplain stripper? Nope... Scrub Scrub Scrub, sand, sand



This will be the color of the valve cover and exetera... Its a duplicolor ceramic/hi temp engine paint. I liked the color and it will match my engine bay



This is were the adjustable cam gears will be... I cut out part of the "Shroud" so I can get at them and still have a timing belt cover.



This is my DC header that I spent 12+ hours port matching... the ports are a little larger than the ports on my head to creat a "Scavenging" effect, as you can see I also gound out the material into each exaust tube quite a way... I didnt want exiting exaust to just "Roll" over a smooth edge, I wanted it to flow and scavenge as well.



So, thats all you get for now... I'll get some more pics when the valve cover is done or the block gets back from the shop... Hope you enjoyed

:flash:

[seth 90DX/ZC]

Dammit! I forgot to post an up close pic of the head were there "Should" be a date... But isnt.

[seth 90DX/ZC]

Ok, like 10+ people have came and looked at my pics... WTF, no one has anything to say?...

[seth 90DX/ZC]

This thread will stay up here untill someone posts "Gee seth, that looks nice" Fawkers!

[GTA]

Gee seth, that looks nice ill have to come see it in person too.

[seth 90DX/ZC]

Why thank you greg I spent alot of time on painting that and port matching and scrubing, its nice to see someone appreciates my hard work... Instead of just looking and saying "I dont like the color" or "I seen better".... Like total time thieves! I spend my time, they steal a peak

[ev0lution7]

seth
i'm gunna get a rover valve cover for my ZC so i will have you beat as far as valve covers go BTW color looks good on that cover i like it hope it goes together good

[seth 90DX/ZC]

Originally posted by ev0lution7
seth
i'm gunna get a rover valve cover for my ZC so i will have you beat as far as valve covers go BTW color looks good on that cover i like it hope it goes together good

Thats the valve cover I wanted Were did you get it?!!!

[XxLuckyLisaxX]

haha, i just saw it so for sure im not just gonna look and not give you some praise, good job seth i can just imagine how accomplishing it will feel for you once it is alllllll done, aren't u all excited?!?

[seth 90DX/ZC]

Originally posted by XxLuckyLisaxX
haha, i just saw it so for sure im not just gonna look and not give you some praise, good job seth i can just imagine how accomplishing it will feel for you once it is alllllll done, aren't u all excited?!?

When I got out to the shop and saw they were dry I ran/skipped into my house @ mach 1 to grab the digi cam, then I remembered the batteries were dead so I mashe to the store, then i remembered that my digi cam takes ass pics @ night so i had to hook up my 4way flood lights (As you can see it did the trick) you can see in the header pic my camera is kinda :alien2:

[90hbvtec]

Originally posted by seth 90DX/ZC
How did I ever get that black crap off the valve cover? Airplain stripper? Nope... Scrub Scrub Scrub, sand, sand



This will be the color of the valve cover and exetera... Its a duplicolor ceramic/hi temp engine paint. I liked the color and it will match my engine bay



This is were the adjustable cam gears will be... I cut out part of the "Shroud" so I can get at them and still have a timing belt cover.



This is my DC header that I spent 12+ hours port matching... the ports are a little larger than the ports on my head to creat a "Scavenging" effect, as you can see I also gound out the material into each exaust tube quite a way... I didnt want exiting exaust to just "Roll" over a smooth edge, I wanted it to flow and scavenge as well.



So, thats all you get for now... I'll get some more pics when the valve cover is done or the block gets back from the shop... Hope you enjoyed

:flash:

im confused bout the port matching..bout the headers.....explain again pleaase...but nice..plannin on getting a ZC...

[mellowboy]

Nice

[Marc-OS]

looks pimpin'

[spy54]

"I dont like the color" or "I seen better"....

lol jk it's nice but you might wanna think again about the cam gear cover b/c it keeps crap from hitting the cam gears and i know you don't want ur motor to go like that

[Civic Jim]

Hey Seth, I LIKE it, should look sweet when its all done,
Keep up the good work

Cheerz


Jim