|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-05-2003, 10:27 PM
|
||||
|
||||
|
silicon hoses ?
Gonna receive my engine on Monday... now i am wondering how good are the silicon hoses... I was gonna replace my old b16a1 hoses with some nice new silicon hoses however have very little experience with them... any advice... or are they all pretty good ?
do and don't would be great thanks. K-
__________________
2012 VW Golf 3 Door Automatic (Company Car)  2011 VW Golf Wagon 5 speed (Company Car) 2010 VW Jetta 2.5 Automatic (Company Car) 2009 VW City Jetta 5 Speed (Company Car) 2009 VW GLI 6 Speed (Company Car) 2008 VW Jetta 2.0T 6speed (Company Car) 1999.5 Audi A4 Quattro Sport 1.8t (Chipped 1.0 bar) Sold 1990 CRX Si (Built B17a) - Stripped and Crushed 1988 CRX Si -- Stolen 1990 Civic Cx -- Sold 1990 Civic Si -- Parted 1989 Civic dx -- Sold 
|
|
#3
04-05-2003, 11:46 PM
|
|||
|
|||
|
Seth makes an apperance!
 Any silicone hose is better than a stock one. Im sure there may be an exception (Maybe vacume hoses?) but generaly speaking, they out-perform any of the ruber hoses in many area's. For instance, have you ever looked @ the inside of your radiator hoses? There is a ton of cloth material in there to help withstand heat... This also creates friction as the water passes as well as making turbulent water flow due to small "Ribs" and imperfections inside the hose. When it deteriorates were do you think it goes? Thats right, straight into your engine  Not little pieces, but whole dime sized chunks  Now just working in my Automotive Mantenance class in colledge I saw quite a few water pumps that had litteraly been hose sabotoged! There were bitz of it in there when I one off, others were all hacked up and we didnt find crap till we flushed the coolent out. Why wouldnt honda or any other automotive company use silicone hoses instead? MONEY, the hose will cost you about $12-15.00 a ft. thats alot compared to a hose that only costs auto manufacturers $0.12 a ft. Silicone hose is made hot (Unlike rubber ones) and are actualy blown out of a large solid piece in a presurized enviroment. This alows for PERFECT smoothness inside and out of the hose and will thus "Out-Perform" a rubber one. Also when the Silicone deteriorates unlike the ruber ones it deteriorates in verry small bits, about the size of the ball of a ball point pen, by this time the hose will have faded and lost its color and will be verry flexable. Generaly speaking, a silicone hose will outlive a rubber one. Thats all for now, stay tuned for seths next lesson.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
