Tamiya 1/12 Ferrari 312 T4 Gilles Villeneuve

[kimi4623]

Hi guys,

This is my new project, the 1979 F1 World Champion Ferrari 312 T4. Even though Jody Scheckter won the championship, I will do the car nº 12 from Gilles Villeneuve.

Now, the kit is 90% done, but until today I haven't found the time to post the WIP photos of it, but I'll show you a lot of images of all the work I've done.

First of all, here's the kit:
















These are the aluminium air funnel from Studio27:


















And here's the beginning of everything. First of all, I put some putty to the chassis and sanded it:
























Then, I primed the chassis with light grey, and then, I added more putty and sanded it again:














Unluckily, I have no pictures of the chassis painted with Chrome Silver, so in the next photos I covered the whole chassis to paint the suspension arms in black:




That's all for now. More to come soon.

[billypee]

Nice start, can't wait to see more.

[da_ashman]

Nice work, cant wait to see more!!

[gtziaf]

Nice Progress...
I follow it closely... I am great Gilles fun...
Good Luck until the end.

[Decs0105]

great start, the T4 is one of my favorite F1 cars

[kimi4623]

Hi guys,

First of all, thank you for your comments!

And now, some more photos. I have painted the seat as it is said in the instruction manual (black with a white part in the back), even though I have seen images where the seat is black or blue.






I have masked again the chassis, to paint some zones with Metallic Grey:








I have removed the belts from the fire extinguisher and the air bottle, and i have scratch built them:




And this is the result, with the chassis painted and the new belts of the fire extinguisher and the air bottle:








And finally, I have done some labels for the switch box from the left of the cockpit:






That's all for now. More to come soon!!

[gtziaf]

Great Update and lovely panels...
Keep Walking...

[kimi4623]

Hi guys,

Here you have more photos of the cockpit, now with the seat with the belts assembled:










Some detail of the front part of the cockpit:




And the steering wheel:


And finally the dashboard. For this kit, I have used a technique that I have learnt from Robrex: I have replaced the copper wire that I have used until now for sewing thread. It is much easier to handle, and the result is also good. Apart from this, you can reproduce thinner wires. And I have also replaced the 1mm transparent wire from Tamiya for 0.5mm fishing wire, that reproduce better the original ones.










I have added some connectors to the switch box (I have added more in the final steps). I have also added three plastic covers in the dashboard:






That's all for now. More to come soon!

[kimi4623]

Hi guys,

Here you have more photos. I have drilled some holes in the pedals:








And some final details in the chassis, before starting to work with the engine:










And this is the beginning of the work with the engine and the gearbox:














This is the engine painted, with a mix between Chrome Silver and Orange (the color of the photos is a little bit different than the real one):












That's all for today. More to come soon!!

[CrateCruncher]

Nice! I love those colors you came up with for the engine. An old trick the ship modelers use when working with thread is to run it over a bar of bee's wax to reduce "fuzz". A candle stump would probably work also.

[kimi4623]

Originally Posted by CrateCruncher

Nice! I love those colors you came up with for the engine. An old trick the ship modelers use when working with thread is to run it over a bar of bee's wax to reduce "fuzz". A candle stump would probably work also.

Thank you for the tip. The wiring job is already finished for this kit, but for sure that I'll try it for the next one!!

[kimi4623]

Hi guys,

I've been a little bit busy these last days, and now I've found the time to most some more photos. Let's start with the engine:


I have replaced the original transparent tubing for fishing wire, and I bought the black tube that you can see in a shoe shop, to replace the original one:










I have done some modifications in order to fit the aluminium air funnel:


There are some steps that I have no photos... , and this is what comes next:




Here, I have used solder wire to create some parts:










That's all for now. More to come soon!

[scrucky]

wow.. realy amazing!!

[da_ashman]

Wow, amazing detailing!!

[smudgeandtaz]

Freaking awesome job. I'm working on the same model at the moment. Is this the end of the photos for the 312T4? I'd love to see some more - Do you have any finished shots of the engine? I'm particularly intersted in where all the wires and hoses start and finish.