|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-06-2009, 12:36 PM
|
|||
|
|||
|
Help! What did I fry
I read that one way to clear the OBDll codes is to remove the ECM ckt breaker in the underhood fuse box. Well it didn't want to come out so I grabed a screwdriver and gently pried it out. In the process something touched something and their was a spark
 .Engine now just cranks and has no intention of starting. Bought a new ckt breaker, replaced the blown 15 amp fuse under the hood and the blown 15 amp fuse fuse under the dash. Now what????? The reason for clearing the codes was the tranny was stuck in safe mode, it was low on fluid, I added 1 qt while the engine was running, turned it off pulled the ckt breaker fried something in the process and now no starting.
__________________
Life is good with my 97 Passport 
|
|
#2
08-07-2009, 12:47 AM
|
|||
|
|||
|
Re: Help! What did I fry
I figured I fried the ECM so I got another one. Still just cranks but I am blowing the 15 anp ignition fuse in the dash panel. Any ideas where to start looking?
__________________
Life is good with my 97 Passport
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
