-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Ford > Windstar
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 06-29-2009, 07:22 PM
bobinkski bobinkski is offline
AF Newbie
 
Join Date: Sep 2004
Posts: 78
Thanks: 0
Thanked 0 Times in 0 Posts
Thermostat 180 "V" 195 degree?

Looking to replace the thermosts on the 96 3.8. Which is the right temp. range, 180 or 195 degrees. Why the 2 different thermostats? Help anyone. Thanks.
Reply With Quote
  #2  
Old 06-29-2009, 07:27 PM
wiswind wiswind is offline
AF Moderator
 
Join Date: Sep 2004
Posts: 3,639
Thanks: 0
Thanked 116 Times in 92 Posts
Re: Thermostat 180 "V" 195 degree?

Mine is 195 degree for my '96 3.8L.
Looking on Rock Auto's website, they list the 180 degree as "alternate temperature" and 195 as OE temperature.
Best to stay with OE unless some specific reason to change.......
Going cooler is very likely to cause problems with emission and fuel economy as the PCM is setup for the warmer temerature.
__________________
Moderator for Ford Windstar room only
Links to my pictures, intended as an aid, not a replacement for, a good repair manual.
1996 3.8L Windstar
http://www.flickr.com/photos/4157486...092975/detail/
2003 Toyota Sienna pictures (not much there yet)
http://www.flickr.com/photos/4157486...781661/detail/
Reply With Quote
  #3  
Old 06-29-2009, 09:08 PM
garync1 garync1 is offline
AF Enthusiast
 
Join Date: Nov 2004
Posts: 1,081
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Thermostat 180 "V" 195 degree?

If I remember right if you live in a hot area like say AZ or some place like that the lower 185 is better.. Or heavy towing.. I think I also remember taxi's ran lower temp thermo's...
__________________
Just when you think you are done. Your not!! Clean the tools. Then you are done.
Nothing impresses a single mom better than a single dad who drives a minivan.Just kidding
Reply With Quote
  #4  
Old 06-29-2009, 09:44 PM
CnlK CnlK is offline
AF Regular
 
Join Date: Jun 2007
Posts: 151
Thanks: 1
Thanked 2 Times in 2 Posts
Re: Thermostat 180 "V" 195 degree?

I like to drill a very small bleeder hole in the t'stat body and orient so hole is on top, hole that small won't effect temp rating.

Edit: Thanks wiswind. The orginal had that bleeder, the aftertmarket one didn't, thought I would add it.
__________________
2014 Chevy Equinox 2.4L, 2010 Grand Caravan 3.8L

Last edited by CnlK; 07-06-2009 at 01:44 PM.
Reply With Quote
  #5  
Old 06-29-2009, 09:48 PM
wiswind wiswind is offline
AF Moderator
 
Join Date: Sep 2004
Posts: 3,639
Thanks: 0
Thanked 116 Times in 92 Posts
Re: Thermostat 180 "V" 195 degree?

The FORD thermostat has that already
http://rides.webshots.com/photo/1340...11220610MWrvbx
__________________
Moderator for Ford Windstar room only
Links to my pictures, intended as an aid, not a replacement for, a good repair manual.
1996 3.8L Windstar
http://www.flickr.com/photos/4157486...092975/detail/
2003 Toyota Sienna pictures (not much there yet)
http://www.flickr.com/photos/4157486...781661/detail/
Reply With Quote
  #6  
Old 06-30-2009, 01:09 AM
MARZBX157's Avatar
MARZBX157 MARZBX157 is offline
AF Regular
 
Join Date: Mar 2007
Posts: 166
Thanks: 8
Thanked 3 Times in 3 Posts
Re: Thermostat 180 "V" 195 degree?

I recently did this job and I bought a fail-safe 192 degree thermostat, I live in new york where temps fluctuate through out the year. These thermostats stay open if they fail instead of close, some prevention there. I also used Felpro's Perma-Dry gasket was thicker than the OEM one. I bought these at Rockauto.com
__________________
2000 Windstar 3.8 V6
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Ford > Windstar


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:33 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts