|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
keyless remote problem
I have a 97 Jimmy that I just bought. Got a remote transmitter and when I went to program it, after connecting a jumper wire to pin 4 and 8 the doors cycle unlock and the tailgate unlocks but the doors do not lock. After removing the jumper the transmitter will only unlock the drivers door and the tailgate, no locking of any doors and will not unlock the other three doors. Any ideas? Relay or the receiver itself.
|
|
#2
|
||||
|
||||
|
Re: keyless remote problem
Quote:
__________________
Remember proper testing gives us the answer to many problems. MT |
|
#3
|
|||
|
|||
|
Re: keyless remote problem
Sorry I have not responded sooner I was out of town for a couple of days. It is a factory system.
|
|
#4
|
||||
|
||||
|
Re: keyless remote problem
Will the other doors lock and unlock from the door lock switch?
__________________
Remember proper testing gives us the answer to many problems. MT |
|
#5
|
|||
|
|||
|
Re: keyless remote problem
Yes all other functions of the door lock system work fine.
|
|
#6
|
||||
|
||||
|
Re: keyless remote problem
Go threw the reprogram procedure again.
Good luck
__________________
Remember proper testing gives us the answer to many problems. MT |
|
#7
|
|||
|
|||
|
Re: keyless remote problem
Already did that 4 or 5 times before posting this thread. Unless I am missing a step something is wrong!
|
|
#8
|
||||
|
||||
|
Re: keyless remote problem
Yoiu may have to get it on a body capapable scanner and check the door lock operation out and for codes.
If any Body\B codes post back codes
__________________
Remember proper testing gives us the answer to many problems. MT |
|
#9
|
||||
|
||||
|
Re: keyless remote problem
If that does not show anything.
Get a good factory repair manual or a all data online sub and go threw the repair flow chart for you problem. http://www.alldata.com/products/diy/index.html Good luck and. Get us know how it goes.
__________________
Remember proper testing gives us the answer to many problems. MT |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|