-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > GMC > Sierra
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 06-19-2009, 08:01 PM
Angle1555 Angle1555 is offline
AF Newbie
 
Join Date: Jun 2009
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
4l60e will not reverse, 98 Sierra

Truck is 1998 GMC Sierra Z71, 5.7

I recently changed the A and B shift solenoids as well as the 3-2 shift solenoid, Reverse worked fine for a couple days then I started noticing it did not want to reverse at a normal slow reverse and if I gave it a little gas it sounded like it binded up a little bit. I never attempted to give it alot of gas in fear making it too bad. It drives forward perfectly fine thankfully.

Today it wont go into reverse at all, I tried it in both 4hi and 4lo, there are no codes being thrown at all, .. however.. this may be related or not.. a few weeks before I did change a wheel hub and couple days later my anti lock brake light came on will not shut off, ive checked everything, connections all that and nothing.. I wouldnt think it would be related as it was and at one point the reverse gear was just fine.


Any help on this would be very helpful

Thanks!
Reply With Quote
  #2  
Old 06-28-2009, 09:32 AM
earnman earnman is offline
AF Newbie
 
Join Date: Oct 2003
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 4l60e will not reverse, 98 Sierra

chances are your reaction hub is broke in the back of the transmission inside.
common for 4l60e.i have 3 with 4l60e all had the same thing happen at different times.
i think you need a rebuild.they have updated reaction hub with 1 more planitary around the hub. but unless you know sombody that will give you a break a reman trans. is the way to go. hope you make out ok
Reply With Quote
  #3  
Old 07-01-2009, 08:45 PM
pbellone's Avatar
pbellone pbellone is offline
AF Newbie
 
Join Date: Aug 2005
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to pbellone
Re: 4l60e will not reverse, 98 Sierra

All forwards are OK? If the sun shell broke, which is a likely thing, you also lose 2 & 4th. Google sun shell and let us know.
Reply With Quote
  #4  
Old 07-08-2009, 07:49 PM
wafrederick wafrederick is offline
Banned
 
Join Date: Dec 2004
Posts: 2,706
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 4l60e will not reverse, 98 Sierra

You do not have to rebuild,just do a repair replacing the sunshell.The upgraded sunshells do break and I know one transmission shop that can prove this,they have seen them broken.While inside,remove the snap ring for the steel for the clutches in the direct drum and look for 5 black springs.If you see them,remove them and throw them away.The aftermarket says to throw them away and GM says to put them back in.The problem with those 5 black springs is that they restrict the clutches from floating and burns them right up.
Reply With Quote
  #5  
Old 07-13-2009, 02:20 PM
ken_man_1 ken_man_1 is offline
AF Regular
 
Join Date: Nov 2004
Posts: 218
Thanks: 9
Thanked 0 Times in 0 Posts
Re: 4l60e will not reverse, 98 Sierra

I had to rebuild my 4L60E that was in my '00 Blazer about 4 years ago - it only had 58,000 Miles on it. Lost 2nd, 4th, and reverse. I dropped the trans and xfer case, removed the bell housing, and then proceeded to pull the trans apart. IF YOU PAY ATTENTION, you can do this yourself. Since I was already into the front of the trans, I replaced the clutches as well. I was told they were the 1st gear and 2nd gear clutches that you wund up pulling out when getting to the reaction sun shell. Overall the repair cost me about $150 - which is a ton cheaper then the alternative. If you do it yourself - also remember that you don't want to force anything - take your time putting it back together. If you force it back together, you'll wind up bending the chutches and so forth. I'll say it again, TAKE YOUR TIME!!!
Reply With Quote
  #6  
Old 07-14-2009, 09:34 PM
wafrederick wafrederick is offline
Banned
 
Join Date: Dec 2004
Posts: 2,706
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 4l60e will not reverse, 98 Sierra

Use a T50 torx plus bit for the bolts holding the bellhousing in and you may have to heat them up removing them due to the locktite used.A regular T50 torx bit will fit,too sloppy.
Reply With Quote
  #7  
Old 07-15-2009, 07:55 AM
ken_man_1 ken_man_1 is offline
AF Regular
 
Join Date: Nov 2004
Posts: 218
Thanks: 9
Thanked 0 Times in 0 Posts
Cool Re: 4l60e will not reverse, 98 Sierra

Quote:
Originally Posted by wafrederick View Post
Use a T50 torx plus bit for the bolts holding the bellhousing in and you may have to heat them up removing them due to the locktite used.A regular T50 torx bit will fit,too sloppy.

Like wafrederick said - use heat, and not an impact to take the bellhousing off. Learn from someone else's mistake...
Reply With Quote
  #8  
Old 10-08-2014, 05:21 PM
Overdriveshifttech Overdriveshifttech is offline
Banned
 
Join Date: Oct 2014
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Thumbs up Re: 4l60e will not reverse, 98 Sierra

I agree the 4L60E sun shells break....even the aftermarket ones. However, in 20 plus years of working on GM trannys "the Beast" by Proselect seems to hold up the best in the 4L60E. Not too expensive either if you think about the durabilty you are buying.... why not spend the extra $20 to get something decent?


I usually buy my sun shells and other hard parts from www.gmtransmissionparts.com the link to "the Beast" sun shell is here

http://www.gmtransmissionparts.com/T...4L60E-1011.htm



I hope this helps!!!
Reply With Quote
  #9  
Old 10-08-2014, 07:55 PM
maxwedge maxwedge is offline
A990 racer
 
Join Date: Mar 2002
Posts: 17,058
Thanks: 26
Thanked 383 Times in 374 Posts
Re: 4l60e will not reverse, 98 Sierra

Good info but this thread has been dead for 5 years.
__________________
Reply With Quote
  #10  
Old 10-08-2014, 08:34 PM
Overdriveshifttech Overdriveshifttech is offline
Banned
 
Join Date: Oct 2014
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 4l60e will not reverse, 98 Sierra

Sorry... but as the song goes "Everything dies baby that's a fact, but maybe everything that dies someday comes back." Except for a worn sun shell. It needs replaced
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > GMC > Sierra


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:11 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts