|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
antifreeze on passenger side floor.please help
hello,
i noticed that i have antifreeze on my passenger side floor.what could be causing that?and is it expensive? thanks |
|
#2
|
|||
|
|||
|
Re: antifreeze on passenger side floor.please help
Sounds like the heater core or hose connections are bad. Heater cores are inexpensive, but the replacement of the unit could be a challenge. Check autozone for repair guides to see if you're up to the repair and the difficulties involved with the replacement.
__________________
|
|
#3
|
|||
|
|||
|
Re: antifreeze on passenger side floor.please help
how would i check the hoses?where is the heater core located?is there a way to check heater core?
|
|
#4
|
|||
|
|||
|
Re: antifreeze on passenger side floor.please help
I would need more information to make a suggestion. Year, Make, Model, AC? Engine.
OR You could go to www.autozone.com look up your vehicle, look up heater core, look at repair guide for this application and make an assessment for yourself. I would recommend this to fimilarize yourself in detail what this repair will entail.
__________________
|
|
#5
|
|||
|
|||
|
Re: antifreeze on passenger side floor.please help
1988 gmc s-15 jimmy 2 door. 4.3l auto trans and yes there is ac
|
|
#6
|
|||
|
|||
|
Re: antifreeze on passenger side floor.please help
Drain the cooling system from radiator OR clamp off the hoses running from engine to heater core at the fire wall passenger side. Disconnect the heater hose clamps and remove hoses.
Inside vehicle, passenger side under glove box, remove the heater core housing screws. You may need to un-screw and move to the side the courtesy light asm. Remove the housing cover. Remove the 2 heater core retainging brackets and remove core. You may have to remove the glove box door to get to the upper housing screws.
__________________
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|