|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-23-2009, 03:27 PM
|
||||
|
||||
transfer case/transmission
i have all the bolts for the transfer case off the drive lines and any bolt or electrical off but the transfer case will not separate all the way from the transmission. Does any one know why. It has about 6-9 mm of separation from prying and tapping but will not go further
 please help!!!!
|
|
#2
05-23-2009, 05:10 PM
|
|||
|
|||
|
Re: transfer case/transmission
According to Alldata You should have removed four bolts and two nuts. You may have forgotten one. Also, double check that you have all wiring and linkage disconnected and check for vent hoses at the top that may be preventing you from sliding it off.
__________________
99 Rodeo LS 3.5L Stroker V-6, 4wd, 31x10.5x15 2 inch Trooper lift, Aisin manual hubs. 03 GMC Envoy XL SLT 4x4 5.3L V8
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
