|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Cavalier Problem Diagnosis Got a problem you can't fix? We can help. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
05-13-2009, 07:21 PM
|
|||
|
|||
|
1996 2.2 heater
The heater on my 1996 2.2 only works on the highest two settings why is this
|
|
#2
05-13-2009, 07:26 PM
|
||||
|
||||
|
Re: 1996 2.2 heater
99% of the time it's the blower motor resistor, rarely the switch can go bad and not give power to the resistor below/above a certain level. Check that you have voltage to the resistor on all the wires (except the ground), if you do, the resistor is bad.
__________________
'04 Cavalier coupe M/T 2.2 Ecotec Supercharged 14 PSI boost, charge air cooler, 42# injectors Tuned with HP Tuners Poly engine/trans/control arm bushings Self built and self programmed progressive methanol injection system
|
|
#3
05-13-2009, 07:29 PM
|
|||
|
|||
|
Re: 1996 2.2 heater
ok i will check that first thing after i get home
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
