|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
Climate control works on High only
I have 04 dakota Quad cab V8 . My climate control works on high only. Changed with one I bought from internet. I put it in, same thing High only. what are the odds. Does the blower have three speeds? I took blower
off unpluged connector and checked voltage . All four speeds register 12 Volts DC. I did find another set of wires with connector beside fan. two of the four wires had corrosion green just like a battery post woud do. is this connector have to do with the low med & high not working?
|
|
#2
|
|||
|
|||
|
Re: Climate control works on High only
I would guess a blower motor resistor on my 96 Dakota its locater on firewall on passenger side, not sure about 04, here's what it looks like:
http://info.rockauto.com/SMP/SMPDetail3.html?RU95.html |
|
#3
|
||||
|
||||
|
Re: Climate control works on High only
I had the exact ssme thing happen on my 03' and after trying several diffrent things it came down to this http://cgi.ebay.com/ebaymotors/AC-He...Q5fAccessories
i wish i would have known in the begining because it takes all of 15 min to change and if you find a leak under the passenger side carpet IT IS NOT THE HEATER COIL! DO NOT TAKE YOUR DASH APART! you will find that the drain hose on the passenger side firewall is behind a heat shield and it tends to blow back in on the outside of that hose, just bend out the heat shield a little and coat arount that hose with some 5200 sealant it should save you a couple of days trying to get the dash out to get to everything else
__________________
I'd give my right arm to be ambidextrous!! |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|