|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-26-2009, 07:51 PM
|
|||
|
|||
|
04 Stratus Belt Tensioner
2004 Stratus SXT with 2.4 L DOHC, replaced alternator, need a method to move tensioner to reinstall belt. The tensioner wrenches I have seen and found don't match the model that is on the car... there is a center bolt that needs loosened to move, but no way to grab the tensioner, the bolt has a torque rating for locking it down, but nowhere to 'latch on' and turn the tensioner... there has to be a wrench or tool for it... but can't find one... anyone have any thoughts?
|
|
#2
01-27-2009, 09:19 PM
|
|||
|
|||
|
Re: 04 Stratus Belt Tensioner
You normally don't need to loosen the pulley look for a way to move it to release the tension.
http://www.autopart.com/tools/toolsmain/tool/T_2700.htm Normally these type of tools will work for you. You maybe able to borrow or rent from AutoZone or Advance Auto maybe O'Riley's.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
