|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-11-2009, 06:38 PM
|
|||
|
|||
|
ABS and Trac Off
I just replaced a "bad" front hub assembly driver's side. When I started there were "no" lights on. Now the ABS and Trac Off lights are on. What have I done or what do I need to do?
|
|
#2
01-11-2009, 06:41 PM
|
||||
|
||||
|
Re: ABS and Trac Off
Obviously it is failing ABS initialization. Get it scanned with an ABS capable scan tool to make sure no other hubs are bad or causing the issue. Also, double check the electrical connection on the replaced hub. What brand hub was used?
__________________
'08 Pontiac Grand Prix GXP (Dark Slate Metallic) - LS4 5.3L V8 '02 Oldsmobile Alero GL2 - LA1 3400 V6 '99 Buick Regal LS - L36 Series II 3800 V6 '03 Honda CR250R MX - 2 Stroke 250cc '97 Pontiac Grand Prix GTP - L67 Series II 3800 V6 Supercharged (Sold) Timeslip 08/12/06 AF Community Guidelines
|
|
#3
01-11-2009, 06:54 PM
|
|||
|
|||
|
Re: ABS and Trac Off
The bearing was a "National". It was the only one I could get my hands on today. Changing the hub is fairly simply. What confuses me is the fact that no lights were on until replacing the bad hub.
|
|
#4
01-11-2009, 07:48 PM
|
||||
|
||||
|
Re: ABS and Trac Off
How was the electrical connector at the hub? If you have a multimeter (DMM) you can run a resistance check of the wheel sensor. Maybe the National had a defective one. Around 1K-1.5K ohms.
__________________
'08 Pontiac Grand Prix GXP (Dark Slate Metallic) - LS4 5.3L V8 '02 Oldsmobile Alero GL2 - LA1 3400 V6 '99 Buick Regal LS - L36 Series II 3800 V6 '03 Honda CR250R MX - 2 Stroke 250cc '97 Pontiac Grand Prix GTP - L67 Series II 3800 V6 Supercharged (Sold) Timeslip 08/12/06 AF Community Guidelines
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
