How Much Labor for FPR Changeout ?

[stick64]

How much should a ASE mechanic charge in labor to replace a fuel pressure regulator in a 2000 Blazer ? We have a 4.3 "w". thx folks

[MT-2500]

Flat rate time on just regulator replace is around 2 hrs.

But other test that go with regulator replacement.
Computer electrical Diagnostic and fuel pressure test is around 1.5 hrs
Injector balance test another 1/2 hr.


Has it been proper tested for a bad fuel pressure regulator problem and is them test included in the regulator replacement time?

If so you could be up to 4 hrs on it.

[stick64]

Test included in labor time. Trying to decide if this is something I want to tackle myself. thx MT

[MT-2500]

Originally Posted by stick64

Test included in labor time. Trying to decide if this is something I want to tackle myself. thx MT

It is not a real hard job.
Good repair manual and a few tools will do it.
Check S-10 forum for how to on it.

Good Luck
And let us know how it goes.

[ericn1300]

See this thread in the Blazer How To thread: Another CPI How-to (focus on regulator)

http://www.automotiveforums.com/vbul...d.php?t=503238

[Blazin1]

The FPR is only $45-$50 @ autozone or kragens.