|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-07-2008, 08:22 PM
|
|||
|
|||
Problems with starter removal
Hey all,
I have a 1992 toyota 4cyl. p/u. I am replacing the starter on it but I cannot seem to gain access to the top bolt that holds the starter to the bell housing. Any ideas? Thanks, 
|
|
#2
11-08-2008, 06:33 PM
|
||||
|
||||
|
Re: Problems with starter removal
It's a PITA to get to, you just need the right combination of ratchets, extensions, and a swivel adapter. I think I used 1/4" drive stuff cause it fit in better. Remeber to disconnect the battery first, or you may end up doing some unintentional welding
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata
|
|
#3
11-08-2008, 06:59 PM
|
|||
|
|||
|
Re: Problems with starter removal
i had same problem i was under my truck and my nephew was under hood once i got bolts out with swivel socket 3/8 drive he moved it around on top and had to drop it threw the bottom. you may even have to use a regular swivel also.
|
|
#4
04-25-2009, 02:37 PM
|
|||
|
|||
|
Re: Problems with starter removal
Quote:
|
|
#5
04-28-2009, 12:22 PM
|
||||
|
||||
|
Re: Problems with starter removal
It's at about 1:00 or 2:00 IIRC. You can't really see it, you have to feel around for it.
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
