|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
2000 Windstar not responsive when first started
After the car has been sitting a while, when step on the accelerator to go (in drive), there is no movement for like a second or two. Note that this is getting progressively worse. I forst noticed it when it was about 1/2 sec delay. Once the car moves, it never happens again. FWIW, I have a transmission cooler installed (aftermarket) but that went on over a year ago. Still, maybe that has something to do with it. I just want to catch something here if there's something to catch. Thanks guys...
|
|
#2
|
||||
|
||||
|
Re: 2000 Windstar not responsive when first started
very simple question but have you checked your trans fluid level? I know that the dip stick sometimes shows "full" but I've heard that this can be misleading. If you do a search on this topic I think it'll show up. I'd add a little if the level is at full or below.
Piper
__________________
----------- 2000 windstar 3.8 2010 honda pilot touring Muskoka Canada |
|
#3
|
|||
|
|||
|
Re: 2000 Windstar not responsive when first started
Quote:
that was it. |
|
#4
|
||||
|
||||
|
Re: 2000 Windstar not responsive when first started
don't ya just love those simple fixes??
__________________
----------- 2000 windstar 3.8 2010 honda pilot touring Muskoka Canada |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|