Need help with remote keyless entry

[kikilani]

I have a 2001 Chrysler Town and Country Lx and I lost my only remote for the van. I have recently bought two remotes from ebay but the only way to program them is by the dealer and that is too expencive. Any one with different ideas besides the dealer or locksmith, it would highly appreciated. Thank you in advance.

Yunior
kikilani View Public Profile Send a private message to kikilani Send email to kikilani Find More Posts by kikilani Add kikilani to Your Buddy List

Delete this Message

[littlebitofinsanit]

try lock smith a lot cheaper if you dont program properly will screw up more they will flash then program

[andym1999]

The dealer just charged me $25 to get one programmed.

[littlebitofinsanit]

you got lucky one in hanover charged 60 wasnt guarnteed to work might break keyless

[Onblsht]

    There are 2 programming procedures for the 01 Town & Country.
 
     If you have at least 1 currently working remote, you can program up to 3 more remotes (total of 4 at once) by yourself with the simple instructions we provide with your remote order.
 
    Without any current remotes, you can still program new units, however a Chrysler DRB scantool is required.   Most Chrysler / Jeep / Dodge dealerships now have the small portable scantools and can program remotes in the parking lot in 10 seconds, rather than book time in a service bay for such a quick procedure.
 
    Most dealerships will do this for free as a courtesy to local customers.