|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
09-29-2008, 01:04 AM
|
|||
|
|||
|
would it be safe?or would need mods?
i have a 1995 240sx with the ka24de well the point is i want to drop in a turbo but the engine is in stock conditions would be safe or itll be neccesary to replace the pistons rods and make some other after market modifications in the block to drop the turbo in my ka24de
|
|
#2
09-29-2008, 05:31 PM
|
||||
|
||||
|
Re: would it be safe?or would need mods?
if your careful with fuel delivery and tuning you can get away without putting pistons and rods in. but the stock HG is pretty fragile and should be replaced with a multi layer steel one.
if you want do skimp on the tune, forged pistons would be a good idea. the stock rods are at least forged even if they arent the strongest rods ever. but the pistons are cast and not as strong. that said, they have been proven to support over 400whp in a very well tuned car.
__________________
|
|
#3
09-29-2008, 05:45 PM
|
||||
|
||||
|
Re: would it be safe?or would need mods?
Never skimp on a tune, pay now for a good tune, or pay later for a new motor.. the stock KA is a pretty stout motor when handled correctly..
|
|
#5
11-24-2008, 11:28 PM
|
||||
|
||||
|
Re: would it be safe?or would need mods?
Quote:
 and yes obviously "dont 2 get crazy wit boost" that itself doesnt help too much so dont post it in first place..sorry, but im gettin sick of this shit wit ppl bring up old bulittins, alwys been like this, since i had my old account....
__________________
 1985 Toyota Celica GT - motor swap in progress 1991 Lexus ES250 - V.I.P DD "i live in the present, and dont look back at the past, i look toward the future to better things.....and i love working on my cars" - Jonny Nguyen
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
