|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
vibration when im braking
every time i brake i get a real bad vibration. but its only when slowing from around 20-to-stop and 65-to-45.
it doesnt do it when i idle or im stopped. i got new tires and i still dont know wut it is... any suggestions?? |
|
#2
|
|||
|
|||
|
Re: vibration when im braking
That's a warped brake rotor.
|
|
#3
|
|||
|
|||
|
Re: vibration when im braking
thats wut i thought, but i wasnt sure. and i dont have the money to take it in to get it checked so i figured id ask here 1st :/
|
|
#4
|
|||
|
|||
|
Re: vibration when im braking
+1. Your rotors are not "warped" but rather have deposits on them.
READ : http://www.stoptech.com/tech_info/wp...rakedisk.shtml
__________________
Present: '02 Sl1 Man '01 SC1 Man '97 Sl2 Auto '96 SL2 Auto '95 SC2 Man Past: '99 Sl2 Auto '97 Sl2 Man '98 SL2 Man '95 Sl2 Man '95 Sl2 Man '94 Sl2 man |
|
#5
|
|||
|
|||
|
Re: vibration when im braking
is there a way to check and/or fix this?
|
|
#6
|
|||
|
|||
|
Re: vibration when im braking
Proper break in of new rotors and pads.
Read the article and youll see how to prevent this
__________________
Present: '02 Sl1 Man '01 SC1 Man '97 Sl2 Auto '96 SL2 Auto '95 SC2 Man Past: '99 Sl2 Auto '97 Sl2 Man '98 SL2 Man '95 Sl2 Man '95 Sl2 Man '94 Sl2 man |
|
#7
|
|||
|
|||
|
Re: vibration when im braking
wow thx. it helps out alot...just gotta wiki up alota the big words...lol
|
|
#8
|
|||
|
|||
|
Re: vibration when im braking
Quote:
__________________
Present: '02 Sl1 Man '01 SC1 Man '97 Sl2 Auto '96 SL2 Auto '95 SC2 Man Past: '99 Sl2 Auto '97 Sl2 Man '98 SL2 Man '95 Sl2 Man '95 Sl2 Man '94 Sl2 man |
|
#9
|
|||
|
|||
|
Re: vibration when im braking
ill defintly do that. know any websites or anything on how to replace them?
|
|
#10
|
|||
|
|||
|
Re: vibration when im braking
http://www.youtube.com/watch?v=CsUn9m4Y4_0
This is for removing the pads. However after the pads and caliper are removed, remove the 2 18mm bolts holding on the caliper bracket. Then remove the rotor, replace it with the new one and do the reverse. The two 18mm bolts for the caliper bracket are then tightened to 81 ft/lbs
__________________
Present: '02 Sl1 Man '01 SC1 Man '97 Sl2 Auto '96 SL2 Auto '95 SC2 Man Past: '99 Sl2 Auto '97 Sl2 Man '98 SL2 Man '95 Sl2 Man '95 Sl2 Man '94 Sl2 man |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|