|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
09-24-2008, 06:59 PM
|
|||
|
|||
|
Ignition Problem
I have a 1999 Grand Am with the 4 cyclinder. While driving along the dash stops working, the gauges stop working and the HVAC stop working. The car still drives, but no gauges or speedometer. Could this be a problem with the ignition switch or the BCM ? Any help would be appreciated. Thanks.
|
|
#2
09-25-2008, 10:37 AM
|
||||
|
||||
|
Re: Ignition Problem
Welcome to AF.
I would start by checking all the fuses, maxi, mini, and regular. Thier are 3 fuse boxes, one on each end of the dash and one under the hood, they all say what they are for on thier lids. If they are good I would have it scanned with a high quality scan tool. Both the BCM and Ignition switch could cause such problems but unsure with out testing the components. Thier is a test procedure for the Ign. switch in the Tips and Maintenance sub forum, check it out ! 
__________________
1999 Grand Am SS 3.4 OHV 
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
