|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#2
03-14-2003, 08:14 AM
|
|||
|
|||
|
ok here is what you need.... 88-91 CRX/CIVIC Si intake manafold (complete) u will need wiring for the injectors and the new distro plug and the RESISTOR BOX with plug u will also need a ECU ..... PM6 (si) or PG7 (teg 88-91) or a PM7 (ZC) u will also need a writeup on a DPFI to MPFI conversion u will also need a NEW distro a 9 WIRE one u cant use your stock 7wire one oh and some hose to go to the manafold and theblock (really cheep heater/fuel line hose) OH and one last thing is u might want to get a intake TUBE that says PM6 not PM5 or PM9 because the PM6 one is a little different than the PM5
|
|
#3
03-18-2003, 11:09 PM
|
|||
|
|||
|
the conversion is very easy i just did a search for mpfi conversion on yahoo and got a lot
__________________
95 b18b new crank, eagle rods, je 10.5 : 1 pistons, 8lb flywheel, stage 3 act clutch, billet aluminium and urathane mounts, balanced rotating mass, 14.3 @ 93mph New additions, teo4h turbo, ssautochrome turbo manifold, custom piping, turboxs bov, dsm 450cc injectors, greddy e-manage fuel controller 13.07 @ 107 untuned
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
