V8 Chevy powered 240sx!!!

[V8-240sx]

Have you ever wanted a V8 Nissan 240sx??? Well now you can.
I now have Chevy V8 engine swap kits for the 240sx.
You don't have to tell that you have an old school Chevy 350,
LT-1, LS-1 or Northstar under your hood. You can have a fast and furious sleeper for real.
Chevy motors are everyware, with a little time and $$$ you can have a 10sec or 11sec 240sx daily driver for for a lot less $$$ than any other type of conversion that will give you this kind of horse power and torque. Chevy power is hard to beat!... dollar per horse... I have found that nissan has done everything else right setting up the 240sx's so why not put a dependable, fast chevy in it.

Contact info: [email protected] :

:grey:

[J SPEC SilEighty]

It's been done by a guy named Aries. He also got tore up by a lude boosting only 7 psi. http://www.limecreekmotorsports.com/project240SS.htm
good luck with your product but I'll stick with Nissan.

[J SPEC SilEighty]

here is the video of aries vs the lude in case if anybody wants to see it. note: you need divx to watch the vid.

http://krazeezx.hypermart.net/vids/t...t1%20240sx.avi

[NSX]

:huh:


:apuke:

[Fliquer]

Going from a roll gave the 'lude a bit of an advantage. High power FWD cars have trouble with weight transfer and traction. The outcome might've been even if it had been from a stop.

But still, how the hell do you let a 7psi lude beat your 350-powered 240sx?

[SiRI]

[Suislide]

Originally posted by V8-240sx
Have you ever wanted a V8 Nissan 240sx???

No.

[Purpura Delujo]

Someone does this to FC RX7s aswell. Whats the point? Unless your SR20DET blew up and you are offered a 350 Chevy for free to put in it I see no point.

[turbo2nr]

why put a v-8 chevy motor when you can go with a RB26DETT motor. any then you can say you have a skyline


:finger: :finger:

[NISSANSPDR]

Originally posted by sr20det2nr
why put a v-8 chevy motor when you can go with a RB26DETT motor. any then you can say you have a skyline

Well as you probably DONT KNOW...the twin turbo's will not clear the steering column on a left hand drift vehicle...

But you didnt think of that...anyways...that install is BEEYOTCH...rated an aneursym by Unstable Hybrids

[turbo2nr]

Well as you probably DONT KNOW...the twin turbo's will not clear the steering column on a left hand drift vehicle But you didnt think of that...anyways...that install is BEEYOTCH...rated an aneursym by Unstable Hybrids ...

damm homie no need 4 da harshness i was just sayin a valid point well if not the rb26dett den maybe a rb25det n yes that swap does work with alot more ease then the rb26dett and itz still a skyline motor!

1

[NISSANSPDR]

Originally posted by sr20det2nr

damm homie no need 4 da harshness 1

My apologies but ppl think you can swap in anything...which is true...all for a price $$$

I just get feed up w/ppl who ditch the KA...that's in my post about 240SX Newbie Rant/Vent

Read it and you'll see why I answered the way I did :bandit:

[Fliquer]

A chevy 350 does not weigh much more than an RB26DETT, and its not as long so it can be placed farther back in the engine bay.

[EvilCerealBoX]

Originally posted by S13_Iketani


No.

funny... i said the exact same thing when he came to the club240.com forum and tryed doing this exact post...

[V8-240sx]

Hey "evilcere...whatever " out of only two posts on this forum looks like you responded to this post again............ uuummmnnn

Dude it's called freedom of ideas.....expression of opinion....... sharing of different concepts....... New or different ideas is the food for new technology and growth, it keeps the world interesting....wouldn't be any fun if everyone had, thought, ate, did the exact same thing..............

.............. you think???