|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#2
04-01-2003, 12:05 PM
|
|||
|
|||
|
make sure all of your under -dash electrical is connected good as well as connections under the hood. my friends car did that. the trans. was in fail safe mode...there was a loose connection.
|
|
#3
10-17-2004, 08:59 PM
|
|||
|
|||
|
Re: Help! Neutral Safety Switch
You can start the vehicle by removing the starter relay and crossing a wire from the starter relay to the hot battery post (with the ignition 'on'). There are 5 posts on the starter relay, you will have to try the socket one hole at a time to see which one will work.
|
|
#4
10-17-2004, 09:47 PM
|
|||
|
|||
|
Re: Help! Neutral Safety Switch
Quote:
HI, CHECK OUT jeepin.com THEY HAVE ARTICLE ON CLEANING THE SWITCH DALE
|
|
#5
10-18-2004, 01:32 PM
|
|||
|
|||
|
I have had a NSS problem with my 88 forever. I simply keep a screwdriver handy and if it gets to where I cannot play around with it in park and/or neutral I just jump across the starter with the screwdriver. Super easy if you have a lift because it's right there under the truck. I know it's not a fix but i will surely start it for ya. Josh
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
