|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| 240Z | 260Z| 280Z | 300ZX (Past Z Cars) The original Z cars - ones that started it all. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
05-22-2008, 09:07 PM
|
|||
|
|||
|
i need a little help
i cant figure out how to mount this blow off valve on this my car so if some one could help. it is a 1982 280zx turbo. i am not any good with these turbos but i am trying to learn just having a heck of a time trying.
|
|
#2
05-23-2008, 03:21 AM
|
||||
|
||||
|
Re: i need a little help
What specific problems are you having?
In general, a blow off valve should be mounted between the turbo and the throttle body, preferably as close to the throttle body as possible. Your kit, if you have one, should have a flange that will be welded onto one of the intake pipes leading to the throttle body. The space available may dictate where it goes but that's something that has to be figured out as you go. After that all that is really needed is to hook up the vacuum line that controls the valve.
__________________
1989 240SX Fastback. . . . . . . . . . . . . . . . . . . . . . . . . . . 1995 300ZX Twin Turbo  Warning: Objects in mirror aren't as fast as they thought they were.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
