Pod Gauges..

[ricecube77]

Pod Gauges that go on the driver's side pillar...

What sizes fit on this thing?
I want to get them like Jason's from G20.net, looks nice nice

Its for a P10 btw

-Phil

[G-Forces]

Don't know about the P10 but it shouldn't be too different, considering that I used a 300zx piller pod.

What you should do it find a shop around you that sells gauge pods and find one that fits closely, but is a bit bigger. Then use a dremel to trim the pod to fit and a heat gun to make the shape fit perfectly. Take your time, not like I did, and you'll do a nice job.

[radicalG20]

I have gauge pods in my 92 p10. I used the dual gauge pod for the 89-94 240SX made by Autometer. These require no modification for the p10. I ordered mine from Summit for about $30. They come black, but you can paint them to match the interior (like I did) I will have some pics of mine very soon. I hope this is helpful.

[drockg20]

g-force

p10 A-pillars and different from P11


Henry and myself has already test fit both cars.


i use one form tenzo r i have a P10. you havet to test fit all the different ones they make.

Henry has a P11 and he used a diffrent guage pod then i used.


SO P10 AND P11 PODS/ A-PILLARS ARE TOTAL DIFFERENT

[G-Forces]

Thanks...The guys at JWT, or was it stillen?, told me they used a 300zx pod and did some modifications to it. They had a P11 project car too.