Evo 7 and RX7

bibendumz · #1 03-03-2003, 03:43 AM

This is a simple and stock Evolution 7 built for a friend, he wanted a lancer but there is no model kit for it, so i used a fujimi Evo 7. i just wanna share this simple and stock car with all of you despite numerous threads on bodykits, modification etc...

i just pop over my cousin's house last few days and he showed me his newly built RX7. he added simple bodykit, scratchbuilt the wings and a set of Aoshima 19 inch Bersaglio spoke II wheels. i took some pics of it and share with all of you.

[S]ky|ine · #2 03-03-2003, 03:47 AM

WaH!!!

The FC3S looks really nice!!! Guess your cousin is really a great modeller!!! The lancer looks clean

Thanks for sharing with us!!!

Forhod · #3 03-03-2003, 03:48 AM

Ahh!! I love the FC!!!! The wings too!!

At last I see the Lancer!!

Top work

supratuner · #4 03-03-2003, 04:05 AM

That RX-7 is great!!!!!

primera man · #5 03-03-2003, 04:11 AM

I hope you told him about us here at AF

Both cars are very nice bits of work....not to keen on the 3 spoke rims on the EVO....But cant fault the nice paint.
Thanks for sharing

njh · #6 03-03-2003, 05:25 AM

Nice lancer, you should have filled up the vents on the hood for a stock lancer.
Nice rx7 from your cousin too.

flyonthewall · #7 03-03-2003, 06:52 AM

Two great models.

OZracing · #8 03-03-2003, 08:08 AM

Nice Lancer....

clatescivicr · #9 03-03-2003, 08:11 AM

Both Great models!! are you sure you don't wanna change those 3 spoke whees? hehe

srlxy · #10 03-03-2003, 10:01 AM

really stock lancer you have there...
haha...

Rtuned · #11 03-03-2003, 12:26 PM

the rim on the Lancer is :apuke: but I know, you took the rim, didn't you....

bad boys...Wahahhaa!!!!

The RX-7

is so beautiful...too bad I don't have 19in.

My Trial Celice and MR-S also have the similar wing on in. Tell your friend the FC looks great.

Purpura Delujo · #12 03-03-2003, 01:30 PM

Holy shit that FC looks cool! How did your cousin make those sideskirts? I notice he used the Initial D kit and he opted for that big scraping bar on the front, but wow. I would really like to know how or where he got the skirts because I am having trouble with my FC. I got the front sittin low, the back full of mufflers and nothing on the sides

. The Lancer looks very nice but I think that even stock steelies would work better then those 3 spokes. Two very nice models, excellent paintwork on the Lancer! Can we have more pictures of the FC? I would like to use it for a guide on mine.

bibendumz · #13 03-03-2003, 02:26 PM

Quote:

Holy shit that FC looks cool! How did your cousin make those sideskirts? I notice he used the Initial D kit and he opted for that big scraping bar on the front, but wow. I would really like to know how or where he got the skirts because I am having trouble with my FC. I got the front sittin low, the back full of mufflers and nothing on the sides . The Lancer looks very nice but I think that even stock steelies would work better then those 3 spokes. Two very nice models, excellent paintwork on the Lancer! Can we have more pictures of the FC? I would like to use it for a guide on mine.

The FC is not the Initial D kit....its the Drift series...the body kit is basically some styrene and Tamiya putty.

As for the "Lancer", my friend wants it as stock as possible...so i used the 3 spoke rims to create the effect..

Quote:

The RX-7 is so beautiful...too bad I don't have 19in. My Trial Celice and MR-S also have the similar wing on in. Tell your friend the FC looks great.

similar wings....because those including the one on the FC is made by the same person

Suislide · #14 03-03-2003, 03:26 PM

Dorfito FC3S!! that thing is just awesome. give my kudos to your friends! how did be make the carbon splitters on the front valence?

bah humbug · #15 03-03-2003, 03:30 PM

That FC is so AWESOME!!!

I would really want to have that as a 1:1 car.

BTW your lancer is very nice. Nice paint job, nice clean and simple build.

POST REPLY TO THIS THREAD