re:key less entry

[STEVE72]

I need help programing my new remote to my keyless entry on my 95 mazda millenia/ Is their anyone that can help! Plese help me.

[jmcclane]

Originally Posted by STEVE72

I need help programing my new remote to my keyless entry on my 95 mazda millenia/ Is their anyone that can help! Plese help me.

I bought new remotes off e-bay and seller provided me with instructions which worked. Pretty complicated. I can copy and mail to you.

[js_318]

Originally Posted by jmcclane

I bought new remotes off e-bay and seller provided me with instructions which worked. Pretty complicated. I can copy and mail to you.

hi jmcclane..I have the same problem, do you think I can have a copy of the instructions....e-mail [email protected]

thanks

[ckeckley]

I also purchased a keyless entry remote from Ebay and it gave me instructions but does not seem to work...can you email those instructions you have as well!! Thanks so much!

[ckeckley]

Originally Posted by jmcclane

I bought new remotes off e-bay and seller provided me with instructions which worked. Pretty complicated. I can copy and mail to you.

Can I have a copy of those instructions as well!!! Thanks!

[ckeckley]

Originally Posted by ckeckley

I also purchased a keyless entry remote from Ebay and it gave me instructions but does not seem to work...can you email those instructions you have as well!! Thanks so much!

Oh, my email is [email protected]...thanks so much!!!!

[Onblsht]

These?

How to set the keyless remote:

1) Sit in the driver's seat and leave the door open;

2) Find the door-light switch on the car at the bottom of the door opening; it's covered by black rubber and when the door closes, the interior and door lights go out; so when you push it with your hand, the same thing happens;

3) Insert key in the ignition and turn to on, back to off and remove the key;

4) Do this three times quickly (key in, key on, key off, key out);

5) Then push the door-light switch three times;

6) Push the lock button on the remote twice; the chime should ring;

7) Wait 10-20 seconds for several chimes and you're in business.
If you're programming more than one remote at the same time, repeat step #6 at the same time so all remotes have the same program.