|
Re: Cracked vacuum line
If it is one of the formed plastic hard lines, then a dealer might have it, or you might try some hard line from Autozone. You can also attempt to splice it with a piece of rubber hose that fits the hard line, usually 3/16" ID rubber line will work. You can use 'zip ties' to snug it against the line.
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at http://www.silicon212.org/9c1!
2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness!
1967 El Camino L79/M20 old school asphalt raper
Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have.
|
03-18-2008, 11:48 PM
