question for 1995 mazda 626

[toycam]

i have a 1995 mazda 626 and the engine light came on i am trying to pull codes and cant find anywere how to.what i have read said ground/#10 bridge to make flash #10 is a empty slot.then i read ground/fen bridge them to.but the fen slot is a emty slot to.so if anyone can give me the correct procedure i would apreciate .it is a 1995 mazda 626 automatic with the 4 cylinder 16valve engine.thanks the problem it doing since light came on is pops or dies if you accelerate to fast seems fine if you accelerate slow

[chubzzam]

check put ur fuel pressure..

[toycam]

i am trying to pull codes to see why the engine light is on.thanks

[chubzzam]

Originally Posted by toycam

i am trying to pull codes to see why the engine light is on.thanks

go here for better understanding/procedure to pull codes
http://www.mazda626.net=2

[Redblue22]

i have the same car
same year and everything
and my engine light came on
we called a place that would do it for free
it was my O2 sensor
my car would idle really crappy close to death
once i replaced the O2 sensor
it was fine.
so i would find somewhere to pull the codes
its OBD1 so its hard to find a place that does it
seeing as most pull only OBD2 these days.