|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
tow package electrical problem
I have a 2001 2500 hd and am having trouble with the factory tow package wiring system. the problem occured when I went to install a tail gate led bar. I went under the truck and the 4 prong adapter was cut off so I toolk the 7 prong copnnector off and spliced the wires in and it worked for a minute then blew the right turn signal fuse and only hte left side worked then put another fuse in and the thing went goofy and only 2 leds worked on the right side and none others does this sound like a short or a ground problem. Thanks Rick
|
|
#2
|
|||
|
|||
|
Re: tow package electrical problem
well typically grounding problems are the most common reasons for this situation, but you might want to recheck your wiring. you may have a wire crossed some where.
Good luck Terrell |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|