|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
1995 s-10 head lights work fine front turn signals work fine but very slow or not at all when the head lites are on. The back tail lites are very dim and only work when head lites are off and both blink very dim also license plate lites blink as well the flasher still clicks and fuses are fine could this be one of the relays in the glove box?
|
|
#2
|
||||
|
||||
|
Re: cpiker1 tail light issues
Poor or nonexistant ground. Most likely in the rear of the vehicle, underneath. Check all of the ground wires that go to the frame. If I had to guess: someone hooked up a trailer wiring harness and the ground connection corroded and broke the ground wire to the frame.
|
|
#3
|
|||
|
|||
|
Re: cpiker1 tail light issues
ckecked ground strap its ok. dont see any sign of ther ever being awiring harness it almost seems to be coming from the turn signal lever
|
|
#4
|
||||
|
||||
|
Re: cpiker1 tail light issues
There are several grounds that all come together in a splice pack near the rear bumper. Just for grins and giggles, run a jumper wire from the license lite socket ground wire to the frame. Post your results.
|
|
#5
|
|||
|
|||
|
Re: cpiker1 tail light issues
Well I went under the back end and found the splice pack and also noticed that ther was a ground also . It looked fine but when I tugged on it it snapped right off. I fixed it and guess what! everything works fine now. Thankyou very much.
|
|
#6
|
||||
|
||||
|
Re: cpiker1 tail light issues
Glad I could help.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|