|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-02-2003, 09:23 AM
|
|||
|
|||
|
flashing SAFE message
My radio says SAFE. I disconnected the battery and then reconnected and then hit MODE and SCAN. Instead of coming up with numbers SAFE just starts flashing. I know that my wife tried to guess the code a few times and so I had to disconnect and reconnect again. Any advise?
Thanks, Bryan 
|
|
#2
02-02-2003, 10:35 AM
|
|||
|
|||
|
In the manual find the code that was issused to your car. If you bought from a dealer, phone em' up and ask them if they changed the code. If you bought privately, track down the last owner and ask them if they changed the code. I had this problem and I just had to keep asking dealers until they gave in to help.
__________________
 [size=0.25] http://www.cdnops.com [/size]
|
|
#3
02-02-2003, 12:30 PM
|
|||
|
|||
|
I have the code and have used it before, but this time I cannot get it to let me enter the code it just flashes instead of coming up with zeros.
|
|
#4
02-03-2003, 01:38 AM
|
|||
|
|||
|
I'll go hunting. Deak prolly knows, but I'll try :P
__________________
[size=0.25] http://www.cdnops.com [/size]
|
|
#5
02-03-2003, 04:51 AM
|
||||
|
||||
|
What car do you have?
mk4: try leaving your radio on when you shut your car off, it will shut off after about an hour. mk3: Leave your car with the ignition key in, so that everything have power, leave it there for about an hour. (do this in a safe place). The radio will reset itself and you will be able to re-enter the passcode.
|
|
#6
02-04-2003, 02:39 PM
|
||||
|
||||
|
i have a 307 but it never happend to me.
|
|
#7
02-04-2003, 05:49 PM
|
|||
|
|||
|
Many Thanks! I have a Mexican Jetta. Many problems as it was shipped disassembled and reassembled in Mexico. They did that in 1994 and 1995 for some reason. It runs well now <knock on wood>
The hour reset worked and I have music again.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
